Block Toll Free

[wobbly_head_bob]

I posted this to you elsewhere, but just in case:


What I like to do:

In "ARS Routes"

the very last route is 200, I assign this route to TDM Trunk Group 99 with a COR group number of 64.

Trunk Group 99 doesn't actually exist.

Class Of Restriction Group 64 = 1-96 (ie: every class of restriction number)

So, in my switches:

ARS Digits Dialed
918005551212 = Route 200
ARS Routes
Route 200= TDM Trunk Group 99:  COR Group Number 64
Class of Restriction Groups
64= Classes of Restriction for Group is 1-96

That should do it.  "ACCESS DENIED" should read across sets with a display.

[ralph]

One thing to note for clarity off of wobbly_head_bob's post:  You have to edit COR 64 and restrict everything.  (that may not be strictly true, if all your trunks and extension have a COR of 1 assigned to them then you only need to restrict 1 in COR 64)  Then assign the COR to the route. 


Another thing that can be done is to create a new route with exactly the same COR and trunk groups as normal calls.
Just create a new digit mode that deletes all digits and inserts something the local weather numbers.  Or FBI or dial a joke or ....

Ralph

 

[lrzuniga]

wow, lots of good stuff here

Im out of office now and off tomorrow...but I'm tempted to go in just to try this out!

Also going to look for Mitel for dummies on the weekend

Will keep you all updated on Monday as to my progress.

 

[ralph]

Also going to look for Mitel for dummies on the weekend

I need to write that book.

Ralph

[lrzuniga]

Followed Wobbly Head's instructions to the letter and it worked!

Only thing is I never get the "Access Denied" on the set but I do get the fast busy when the TF is called.

Thanks everyone I really appreciate all the support....I suspect I'll post soon about something else

L.