Author Topic: Old MX controller's RAM  (Read 1774 times)

Offline bpone

  • Jr. Member
  • **
  • Posts: 41
  • Country: gr
  • Karma: +0/-0
    • View Profile
Old MX controller's RAM
« on: September 18, 2014, 05:04:57 AM »
Hello
a customer has an old MX controller (Part number:50004190), running software ICP 9.
This controller does not have 512 RAM, so i cannot upgrade it to MCD.
Does anyone know if there is additional RAM i can add to the controller?
Otherwise i will have to replace the controller itself.
Thanks in advance.

     BR/John


Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1401
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Old MX controller's RAM
« Reply #1 on: September 18, 2014, 05:22:57 AM »
Pretty sure you are going to have to get new controller.

Not upgradeable due to being hard soldered.

Offline bpone

  • Jr. Member
  • **
  • Posts: 41
  • Country: gr
  • Karma: +0/-0
    • View Profile
Re: Old MX controller's RAM
« Reply #2 on: September 18, 2014, 05:35:07 AM »
Thanks very much.

    BR/John

Offline jrg0852

  • Sr. Member
  • ****
  • Posts: 309
  • Country: us
  • Karma: +3/-0
  • Look out for the next tech. because it may be you!
    • View Profile
Re: Old MX controller's RAM
« Reply #3 on: September 18, 2014, 08:32:04 AM »
I may be wrong, but there is a 256 mod. that you can add to certain systems, but maybe not the MX, that will bring you up to 512. P/N 56005086RC. You'll have to check the hardware man. to see if the MX accepts this. Sorry if it doesn't.

Offline pmhaynes

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 238
  • Country: gb
  • Karma: +11/-0
    • View Profile
Re: Old MX controller's RAM
« Reply #4 on: September 18, 2014, 12:14:07 PM »
not sure on the age. But i have upgraded a few system by replacing the 256mb module with a 512mb so dimm.
I bought mine from Mitel.
Part numbers are in the release notes/manuals

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1210
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Old MX controller's RAM
« Reply #5 on: September 18, 2014, 02:17:01 PM »
The ram on the MX is not upgradeable, have to get a new controller.


 

Sitemap 1 2 3 4 5 6 7 8 9 10