Author Topic: Need jumper for Conference module to 5330 IP phone  (Read 2664 times)

Offline rlafata

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +0/-0
    • View Profile
Need jumper for Conference module to 5330 IP phone
« on: September 12, 2014, 02:48:13 PM »
I am missing the jumper from a 5310 conference module to a 5330 IP phone.  My vendor does not sell this part separately from the module.  Does anyone know where I can just get the jumper?


Online johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Need jumper for Conference module to 5330 IP phone
« Reply #1 on: September 12, 2014, 08:37:35 PM »
I don't think you will find that part

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4100
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Need jumper for Conference module to 5330 IP phone
« Reply #2 on: September 13, 2014, 12:37:29 PM »
Johnp is correct, that part is not sold separately...

Doesn't it just short the two center pins? A small needle nose and a drop of solder or conductive glue might do the trick.

Online johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Need jumper for Conference module to 5330 IP phone
« Reply #3 on: September 13, 2014, 01:09:10 PM »
Doesn't it just short the two center pins? A small needle nose and a drop of solder or conductive glue might do the trick.

I think that is the the jumper for cordless charging. From looking at the install guide, it looks like about a 3 inch cable

Offline marcolive

  • Full Member
  • ***
  • Posts: 131
  • Karma: +2/-0
    • View Profile
Re: Need jumper for Conference module to 5330 IP phone
« Reply #4 on: September 14, 2014, 11:46:21 PM »
Some time ago, we found that these connectors are the same used to plug an old CD-ROM drive to a PC sound card.

http://www.circuitspecialists.com/content/76251/10-190-0.jpg

Remember that?

We made a cable using these connectors and were able to make a 5610 work on a 5330. All 4 pins must be connected.


 

Sitemap 1 2 3 4 5 6 7 8 9 10