Author Topic: UCA 6.0 Compatible with Exchange 2010 SP3?  (Read 2139 times)

Offline Lebeter

  • Contributer
  • *
  • Posts: 10
  • Karma: +0/-1
    • View Profile
UCA 6.0 Compatible with Exchange 2010 SP3?
« on: January 24, 2014, 04:32:43 PM »
Is anyone aware of whether UCA 6.0 Server and Clients are compatible with Exchange 2010 SP2 or SP3?  I need to upgrade our server to SP3 for some other issues but was unable to back when we were on UCA 5.x and being told that it was only compatible with Exchange 2010 SP1.  Can anyone provide some clarity to this, I need to get SP3 on our mail server soon.


Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Re: UCA 6.0 Compatible with Exchange 2010 SP3?
« Reply #1 on: January 24, 2014, 06:19:27 PM »
Hello,

The release notes for 6.0 SP1 says it now supports Exchange 2010 Sp3 so you should be good to go!

Mark.

Offline Lebeter

  • Contributer
  • *
  • Posts: 10
  • Karma: +0/-1
    • View Profile
Re: UCA 6.0 Compatible with Exchange 2010 SP3?
« Reply #2 on: January 24, 2014, 07:10:02 PM »
Thanks for the quick reply.  Don't have SP1 on yet, will have to get the dealer out here to do that.  Do you know offhand if SP2 is supported by the original 6.0 release?

Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Re: UCA 6.0 Compatible with Exchange 2010 SP3?
« Reply #3 on: January 26, 2014, 06:19:21 AM »
Doesn't look like it, the original 6.0 supports up to 2010 SP1, then once up to SP1 it will support 2010 SP3.

Hope this helps.

Offline Lebeter

  • Contributer
  • *
  • Posts: 10
  • Karma: +0/-1
    • View Profile
Re: UCA 6.0 Compatible with Exchange 2010 SP3?
« Reply #4 on: January 27, 2014, 07:17:17 PM »
It looks like unless you want native calendar integration which we don't use any calendar integration natively or with Outlook, just contacts integration with Outlook, it may be a mute point to require SP1 before I run the Exchange SP3 Update.  Does that sound right?

Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Re: UCA 6.0 Compatible with Exchange 2010 SP3?
« Reply #5 on: January 28, 2014, 02:55:26 PM »
yes i think you will have to do the UCA 1st , then Exchange, or both at the same time  :)


 

Sitemap 1 2 3 4 5 6 7 8 9 10