Author Topic: Incoming Calls Ringing to no where  (Read 2683 times)

Offline Westley

  • New Member
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Incoming Calls Ringing to no where
« on: May 14, 2013, 10:14:05 AM »
Hi,

I've just taken over handling this Mitel 3300 CXi and it is driving me nuts.

Just moved from a PRI line to 4 LS/GS lines. Everything was working good for about a week and now incoming calls are getting lost somewhere.

Outgoing calls can still be made, but incoming calls just ring and ring.

I've gone thru all the settings the best I can and don't see anything wrong. Then again, I feel like I'm speaking a foreign language dealing with this Mitel, so it could be staring me in the face.

Any ideas how I can even begin to trace how incoming calls are being handled?

Thanks,
Westley


Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Incoming Calls Ringing to no where
« Reply #1 on: May 14, 2013, 11:12:38 AM »
check your call answering point in Trunk attributes form for alog trunks.

Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
Re: Incoming Calls Ringing to no where
« Reply #2 on: May 17, 2013, 09:37:04 AM »
Do the lost calls receive a busy signal or any error? Are they going to night mode somehow?

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Incoming Calls Ringing to no where
« Reply #3 on: May 17, 2013, 10:19:55 AM »
This could be a ton of things... follow the call flow and verify day/night mode. I recently had an issue where the calls rang into a phantom IP phone that had multicall appearances on 10 phones and someone accidentally call forwarded the phantom to an invalid number, gave identical results as you are reporting.

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Incoming Calls Ringing to no where
« Reply #4 on: May 19, 2013, 09:12:26 PM »
Also could be an open on the main inbound trunk hunt group

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: Incoming Calls Ringing to no where
« Reply #5 on: May 21, 2013, 07:27:37 AM »
How many trunks in your incoming trunk group? Have found site where they acutally have 5 but only connected 4. Are you getting CLI on your trunks? Have seen trunks not setup to recieve CLI ( circuit descriptor ) get befuddled when the trunks are supplying it.


 

Sitemap 1 2 3 4 5 6 7 8 9 10