SIP Trunk

[dh_lab]

any idea how to configure SIP Trunk on Mxe Controller without router, if PABX network range and SIP Trunk network is different.
Example: PABX  IP - 10.10.10.26
                          Net-mask - 255.255.0.0
                          Gateway - 10.10.10.1
                          DHCP - 10.10.10.30 - 10.10.10.50 - 10.10.10.150
               SIP     IP - 192.168.51.50 ( SIP provider recommend to give this IP to a system )
                          Net mask - 255.255.255.0
                          Gateway - 192.168.51.10


thks

[ralph]

Without a router between the networks, this isn't going to happen.
The packets have to get from 10.10.10.X to 192.168.51.x.
Can't do that without some type of router.

Ralph