Author Topic: Remote Admin Access to Mitel TA7102  (Read 2308 times)

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Remote Admin Access to Mitel TA7102
« on: October 12, 2022, 10:32:46 AM »
I've picked up a TA7102 to use as an interface for a fax machine in Las Vegas.
The problem I've come up against is that I can't access the admin interface unless I'm local on that network.
I need to install this on a network that's remote to me, so I need to ensure I have access.
When I look at the access control tab, the only options I see is Local or Radius.
Is there a way I can set it up to accept access from anywhere on our WAN?

Ralph


Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 692
  • Country: us
  • Karma: +17/-0
    • View Profile
Re: Remote Admin Access to Mitel TA7102
« Reply #1 on: October 12, 2022, 01:45:32 PM »
In Management > Misc is your System Management Network Interface set to "All"?

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Remote Admin Access to Mitel TA7102
« Reply #2 on: October 13, 2022, 09:27:39 PM »
Turns out, all I had to do is move my ethernet cable to the WAN port.
Then I was allowed to access remotely.

Now to get the dang thing actually working...
Ralph

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Remote Admin Access to Mitel TA7102
« Reply #3 on: October 14, 2022, 02:22:19 AM »
Be careful if you connected the LAN port to the live network, by default the Mitel TA will be a DHCP on it's LAN port. IT guy might not be happy with you.  ;D

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Remote Admin Access to Mitel TA7102
« Reply #4 on: October 14, 2022, 06:44:58 AM »
Yeah, I saw DHCP was enabled by default. That surprised me.

Ralph

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 692
  • Country: us
  • Karma: +17/-0
    • View Profile
Re: Remote Admin Access to Mitel TA7102
« Reply #5 on: October 14, 2022, 08:45:06 AM »
When pulling a 3300 for hardware maintenance you can always count on me plugging back in to the WAN port instead of LAN port 1 when  re-racking it.

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 692
  • Country: us
  • Karma: +17/-0
    • View Profile
Re: Remote Admin Access to Mitel TA7102
« Reply #6 on: October 14, 2022, 08:48:34 AM »
Turns out, all I had to do is move my ethernet cable to the WAN port.
Then I was allowed to access remotely.

Now to get the dang thing actually working...
Ralph

Use this from Tech Electronics - http://mitelforums.com/forum/index.php?action=dlattach;topic=10306.0;attach=2786


 

Sitemap 1 2 3 4 5 6 7 8 9 10