Ring group members across IP/xnet trunk

[Dogbreath]

Customer has multiple non-clustered systems connected with IP/Xnet trunks. They want to add some remote members to a ring group. Would I be right in thinking that External Hotdesk Users would be the way to do this?
I seem to remember that this required the callee to press a digit to accept the call when I tested on the PSTN but I assume this could be disabled as it wouldn't be necessary in this scenario.

[sunspark]

Not sure but you can't add remote users to the same ring group if the systems are not clustered.

You can use EHDU, and i suggests you to keep the press digits only if one of the ring group member will be a mobile phone., because if the mobile member Is switched off or in a tunnel, the caller may fall on the voicemail of the mobile.  So the press digits validates the call

[Dogbreath]

The remote users are just desk phones on another MiVB across an IP/Xnet trunk.

[sunspark]

Then, use Ehdu