Author Topic: Mitel 3300 CX II ICP controler 50006093, Configure new router  (Read 1506 times)

Offline ecopower

  • New Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Mitel 3300 CX II ICP controler 50006093, Configure new router
« on: December 16, 2021, 01:14:50 PM »
I have a broken router and I have replaced it with the router TP-link ER605.
I need to login to find the configured static ip address to match that to my new router configuration.
How does one login to the mittel controller? It is unclear if this work via an ip address (I tried many, including 192.168.1.5)
or through other means?


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Mitel 3300 CX II ICP controler 50006093, Configure new router
« Reply #1 on: December 16, 2021, 03:34:41 PM »
It is usually through ip address, default is 192.168.1.2 but this can be changed. Only way to find it for sure is connecting to the maintenance port via RS-232. I guess determining this will be dependent upon version. Not sure with u-boot that you can see this by stopping the boot process

Offline Dogbreath

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 396
  • Country: gb
  • Karma: +18/-0
    • View Profile
Re: Mitel 3300 CX II ICP controler 50006093, Configure new router
« Reply #2 on: December 17, 2021, 05:17:58 AM »
If you don't have a serial port you can patch yourself directly into the LAN port and do a packet capture, you will eventually see it ARPing for the default gateway.


 

Sitemap 1 2 3 4 5 6 7 8 9 10