Author Topic: Moh from IVR port to ACD path  (Read 1466 times)

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 984
  • Country: mx
  • Karma: +16/-1
    • View Profile
Moh from IVR port to ACD path
« on: November 19, 2021, 12:41:59 PM »
hello fellows,

issue : when no agent is available, the caller hears the ringing tone instead of MOH.

ACD path 111111
directory number 1234 ( Huntgroup RAD with no port)
Audio source  1  : my embedded moh.

COS : Trunk , agent ; Direct ip , Ivr port  :
local music on holde source YES
Music on hold on transfer YES

I even tried to put the moh in a network zone and apply it to my IVR ports but it doesn't work.

any idea ?


Offline Ronan

  • Full Member
  • ***
  • Posts: 149
  • Country: fr
  • Karma: +1/-0
    • View Profile
Re: Moh from IVR port to ACD path
« Reply #1 on: November 30, 2021, 11:09:43 AM »
In old times you needed a blank RAD for MOH to work, I still do it that way, not sure if it's needed.

You would need to add a RAD port (one that you already use elsewhere, no need to spend on a new license), configure a workflow for your RAD hunt group with a message, put a wav file with 1s of silence, and now you should hear your MOH.

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 984
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Moh from IVR port to ACD path
« Reply #2 on: December 09, 2021, 01:06:46 PM »
hi ronan ,

I have two clustered ipbx (gateway & users)
moh COS transfer (direct ip trunk) was set to no .


 

Sitemap 1 2 3 4 5 6 7 8 9 10