Author Topic: MiCollab registration fail loop on some WiFi networks  (Read 1970 times)

Offline rsh_mitel

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
MiCollab registration fail loop on some WiFi networks
« on: November 08, 2021, 12:26:39 PM »
I have a rally tricky issue
MiCollab on IOS, v 9.3.111
Server 9.3.0.30
it works fine on some WiFi networks but goes into registration fail loop on other
Can't seem to find any difference between those wifis, some of them are out of the box verizon FIOS so can't be that different.
My integration vendor is having hard time figuring this one out despite diags sent many times over
Anything you could suggest me to try?
Factory reset, SIP pwd change was done many times over already

Thanks


Online dilkie

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 343
  • Karma: +11/-0
    • View Profile
Re: MiCollab registration fail loop on some WiFi networks
« Reply #1 on: November 08, 2021, 12:33:02 PM »
f/w rule somewhere...

You'll need to get network traces to confirm. SIP is a known protocol and sometimes there are SIP ALG (Application Level Gateway) logic that tries to "fix up" sip messaging but usually ends up messing it up.

If you can, turn off any SIP ALG's. Also, using sip-tls rather than udp can help because the traffic will not be observable to any f/w code and thus avoid modification.

Offline rsh_mitel

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: MiCollab registration fail loop on some WiFi networks
« Reply #2 on: November 08, 2021, 04:02:25 PM »
Thank you for your advice

Looks like disabling SIP ALG on Verizon FIOS routers is off the table for most users
https://kb.intermedia.net/article/3343

On my server settings I have SIP set to use all 3 protocols, UDP, TCL and TCP/TLS. Are you aware of a way to force MiCollab app to use TCP/TLS only?


Online dilkie

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 343
  • Karma: +11/-0
    • View Profile
Re: MiCollab registration fail loop on some WiFi networks
« Reply #3 on: November 09, 2021, 08:54:20 AM »
assuming you are using an MBG, configure sip with udp only on the "private" side if you don't have any udp sip trunks. or disable udp sip altogether if you have sip tcp or tls to your icp.

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: MiCollab registration fail loop on some WiFi networks
« Reply #4 on: November 09, 2021, 04:13:43 PM »
I think tls is default unless changed

Offline Dogbreath

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 396
  • Country: gb
  • Karma: +18/-0
    • View Profile
Re: MiCollab registration fail loop on some WiFi networks
« Reply #5 on: November 19, 2021, 04:42:03 AM »
SIP TLS precludes any "help" from SIP ALGs!


 

Sitemap 1 2 3 4 5 6 7 8 9 10