Mitel 5634 w/ Meraki

[squirrell777]

We've been using the Mitel 5624s with our Meraki wireless for a year or so now.  We've changed a couple units and everything goes fine.  The one thing that we MUST do is set the 802.11 protocol to only B/G for them to connect. 

We just purchased a 5634, but can't get it to connect.  There's no 802.11 option in these, only the band settings.

Anyone else have this issue and find a solution for it?  Another thing to note, i don't use a dock to program, just use the Admin panel on the phone itself.

Thanks!

[sunspark]

You need the programmer + winpdm 3.15

[squirrell777]

Awesome thx!  is the programming base the same between the 5624 and 5634?  Mitel 5624 Programmer, Part# 51301221

Also, where can i find WinPDM 3.15?  Can't find it anywhere in my Mitel portal.

Thx for the help!

[sunspark]

Awesome thx!  is the programming base the same between the 5624 and 5634?  Mitel 5624 Programmer, Part# 51301221

Also, where can i find WinPDM 3.15?  Can't find it anywhere in my Mitel portal.

Thx for the help!

Same progrmmer for both.
You can find the winpdm in the software download > wifi phones withe the 5634 firmware

Attached screenshot

[sunspark]

Attached

[squirrell777]

No option for that with the 5634 in my WinPDM

[sunspark]

maybe becaue we don't have the same version.
you need to download the winpdm from Mitel software download center.

[squirrell777]

I'm using WinPDM straight from Mitel.  It's v 3.15.3

Are you sure you're looking at a 5634 and not a 5624?  The 5624 has that option both on set and PDM, but the 5634 doesn't have on either.

[sunspark]

in the winpdm v3.15.3 there is no 5634 option in the template.
so i use the 5624 template for my 5634 and it works.