Author Topic: Best way to Verify Paging Groups are Working  (Read 1433 times)

Offline jasonsullivan27

  • Contributer
  • *
  • Posts: 9
  • Country: us
  • Karma: +0/-0
    • View Profile
Best way to Verify Paging Groups are Working
« on: November 02, 2021, 04:14:29 PM »
Hi Everyone!

I've setup 10 Paging Groups on our 3300 system.  I've tested two of the smaller groups who only have a few users in them by emailing the Users and having them reply back that they received the page.   I have a few larger groups with 30-40 users in them who will not always be at their desk so this isn't an option.  I've tried to search through the SMDR logs after a test, but can't seem to locate logs indicating the page went through.

Is there a way to get this information out of the Logs or another testing method that I'm not thinking of?

Thanks for the help!
Sully


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Best way to Verify Paging Groups are Working
« Reply #1 on: November 02, 2021, 05:42:35 PM »
I don't think there is any log that shows a direct page

Offline jasonsullivan27

  • Contributer
  • *
  • Posts: 9
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Best way to Verify Paging Groups are Working
« Reply #2 on: November 03, 2021, 09:19:13 AM »
Thanks John.  I'm thinking maybe this will be a "set it & forget" it type config with no way to log it.

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Best way to Verify Paging Groups are Working
« Reply #3 on: November 03, 2021, 04:21:51 PM »
I don't think direct page is considered a call. I have tried in the past to run it through a loopback trunk but had no success. This was to limit call/connection time.


 

Sitemap 1 2 3 4 5 6 7 8 9 10