« previous next »
Pages: [1]   Go Down

Author Topic: MIVCR getting error " waiting for extension association from SRC "  (Read 1262 times)

Offline abmitel

  • Jr. Member
  • **
  • Posts: 71
  • Country: in
  • Karma: +0/-0
    • View Profile
MIVCR getting error " waiting for extension association from SRC "
« on: May 28, 2021, 08:48:00 AM »
Hi
we have registered micollab softclient as Teleworker ( from public network ) . the teleworker is registered successfully on MBG . the controller is MIVB 3300

the screen shot is attached for your reference

MIVCR ver is 9.1 sp3

Warm Regards
Logged

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: MIVCR getting error " waiting for extension association from SRC "
« Reply #1 on: May 28, 2021, 09:02:57 AM »
What software version is everything running? What device type? Are you set for direct or indirect mode?
Logged

Offline abmitel

  • Jr. Member
  • **
  • Posts: 71
  • Country: in
  • Karma: +0/-0
    • View Profile
Re: MIVCR getting error " waiting for extension association from SRC "
« Reply #2 on: May 28, 2021, 10:32:55 AM »
MIVCR version - version 9.1

device micollab soft client deployed in teleworker mode . the user is successfully registered on mbg as teleworker user

we have set indirect mode
Logged

Offline billbry66

  • Full Member
  • ***
  • Posts: 93
  • Karma: +3/-0
    • View Profile
Re: MIVCR getting error " waiting for extension association from SRC "
« Reply #3 on: May 28, 2021, 09:46:02 PM »
you must use direct mode for Micollab Softphone recording
Logged

Offline abmitel

  • Jr. Member
  • **
  • Posts: 71
  • Country: in
  • Karma: +0/-0
    • View Profile
Re: MIVCR getting error " waiting for extension association from SRC "
« Reply #4 on: May 29, 2021, 05:29:52 AM »
Hi Bill
i will use direct mode and check , are you sure for micollab softphone on teleworker also we have to use direct recording
Logged

Offline billbry66

  • Full Member
  • ***
  • Posts: 93
  • Karma: +3/-0
    • View Profile
Re: MIVCR getting error " waiting for extension association from SRC "
« Reply #5 on: May 30, 2021, 12:33:20 AM »
teleworker is direct mode always as the RTP is forced to stream via the MBG

the key setting is that the MiVCr needs to be set to direct mode and remove indirect from ICP on MBG
any internal fixed phones will have to be registered to a lan only MBG as the SRC.
Logged

Offline abmitel

  • Jr. Member
  • **
  • Posts: 71
  • Country: in
  • Karma: +0/-0
    • View Profile
Re: MIVCR getting error " waiting for extension association from SRC "
« Reply #6 on: May 31, 2021, 01:50:53 AM »
Hi Bill
we will test teleworker ( micollab softphone ) with direct recording and keep you posted
thanks
Logged

Offline abmitel

  • Jr. Member
  • **
  • Posts: 71
  • Country: in
  • Karma: +0/-0
    • View Profile
Re: MIVCR getting error " waiting for extension association from SRC "
« Reply #7 on: June 03, 2021, 10:02:32 AM »
Hi Bill

we tested with direct recording option but error remains same

Logged

Offline abmitel

  • Jr. Member
  • **
  • Posts: 71
  • Country: in
  • Karma: +0/-0
    • View Profile
Re: MIVCR getting error " waiting for extension association from SRC "
« Reply #8 on: June 05, 2021, 04:47:07 AM »
Hi Bill
we resolved the issue with help of Mitel

Regards
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10