5624 Ntp

[sunspark]

I would like to know how to configure the ntp server on 5624 phones

when I put my phone on the programmer, the phone retrieves the date and time from my computer.

I tried to put on my computer the wrong date / time to be sure that the phone will then look for the date and time via the ntp server.

In my template I tried two things that didn't work:

in my template -> Device -> general -> ntp server: I tried with the ip of my mivb and the ip of an ntp server.

I applied the template to my phone but it still takes the date and time from my computer

I then added in the dhcp option (I use the msl dhcp), option 42 (ntp server)
the problem is that my phones have a 20days lease and, I can't  clear the lease so that my phones can make a new request.

any idea to put the ntp on my 5624?

[acejavelin]

Reboot the phones... When they boot they will do a DHCP request and get the new option.

[sunspark]

it's good I found the problem.

the client's firewall blocked all the dhcp scope from wifi phones to internet (to the ntp server)

thank you !