Author Topic: Export address book via telnet  (Read 760 times)

Offline Fizzer

  • New Member
  • *
  • Posts: 1
  • Country: gb
  • Karma: +0/-0
    • View Profile
Export address book via telnet
« on: March 29, 2020, 01:17:47 PM »
Hi Folks,
I have a bit of a problem, I hope you can help (yes, this is my first post and I'm asking for help - sorry about that) :/

I have recently joined a company and I have a 3300 for which I did not have the password or a backup.
So, to remedy this I followed the password reset procedure which required a reboot (this has worked, I can now log in)
Unfortunately, the disk is a bit dead and, during boot, is giving quite a few c0003 errors.

After approx 3 hours, it's finally booted with quite a few failed elements, however it is able to receive and make calls (that's about it). I feel quite fortunate that it does this t all and I am not keen on rebooting at all at the moment.

The web and ftp interfaces are dead, I can't get a backup or report out of them.

So here's my question:
The serial port on the front is working OK - is there any way to retrieve any semblance of a directory listing (names/numbers) from this interface?

Thanks in advance and sorry for just dropping in with my troubles unannounced!

Thnx


 

Sitemap 1 2 3 4 5 6 7 8 9 10