Author Topic: Mitel 5212/5224 stuck on TFTP  (Read 1168 times)

Offline Ronan

  • Full Member
  • ***
  • Posts: 149
  • Country: fr
  • Karma: +1/-0
    • View Profile
Mitel 5212/5224 stuck on TFTP
« on: March 19, 2020, 05:02:29 AM »
Hello,

my client has made change to its network to reinforce security. I don't know exactly what changes, though. The network gurus are a bit under water with other tasks so I want to have an idea before bothering them.

53XX and 69XX phones work fine. However on some sites (big extended LAN network over the planet) the 52XX phones don't boot, they stay stuck at the TFTP step then reboot. I have not upgraded my 3300 in more than a year so there is no new software to load for the phones, they should just be doing their version check and boot.

Basically on some sites (each with own network parameters, but should be the same everywhere, evidently it's not the case) no 52XX phone is working (but 53XX OK), on other sites all 52XX phones are working.

What's the difference between 52XX and 53XX phones that could explain this ? According to the documentation there is no network protocol or port difference.

Thanks for your ideas

Regards


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4100
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Mitel 5212/5224 stuck on TFTP
« Reply #1 on: March 19, 2020, 09:39:15 PM »
52XX phones pull firmware on each boot... Make sure the following ports are allowed...

68-69/UDP (TFTP Primary port)
20001/UDP (TFTP backup port
)
6900-6902/TCP MiNet Traffic
3998/TCP SAC SSL
3999/TCP SAC unsecured
6880/TCP SAC over https
20000-21000/UDP RTP audio


 

Sitemap 1 2 3 4 5 6 7 8 9 10