Author Topic: No Voice on Teleworker using SonicWALL  (Read 4245 times)

Offline maxcheung

  • Contributer
  • *
  • Posts: 9
  • Karma: +0/-0
    • View Profile
No Voice on Teleworker using SonicWALL
« on: January 26, 2011, 12:04:09 PM »
I set up my TW was in connected state, if I use TW mode's phone call other phone, the phone will ringing,after i pickup the phone, both way is no voice.

is the MAS must pleace in DMZ when i use teleworker? as I watch the TW guideline.
What different between a server in DMZ and forward all port to server's ip ?
how to check MSL was in server-only mode or server-gateway mode?
my firewall is sonicwall 3060.

Thank you very much.


Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: No Voice on Teleworker using SonicWALL
« Reply #1 on: January 26, 2011, 04:31:41 PM »
Have you tried running the TNA analyzer tool from the outside?

Offline maxcheung

  • Contributer
  • *
  • Posts: 9
  • Karma: +0/-0
    • View Profile
Re: No Voice on Teleworker using SonicWALL
« Reply #2 on: January 26, 2011, 08:49:08 PM »
tested, but not sure what going wrong.
Cap screen FYR.
  <<Chakara removed link - virus infected>>
« Last Edit: January 31, 2011, 11:53:58 PM by Chakara »


 

Sitemap 1 2 3 4 5 6 7 8 9 10