Author Topic: MiCollab softphone - call failed  (Read 4525 times)

Offline andy

  • New Member
  • *
  • Posts: 2
  • Country: gb
  • Karma: +1/-0
    • View Profile
MiCollab softphone - call failed
« on: January 27, 2020, 08:32:38 AM »
Hi All,

I have MiCollab working on MiVoice Business Express 8.1.2.8

We have deployed approx. 30 users and they all connect as expected, either using their Mobile, tablet or pc/laptops.

Most users work and they can make and receive both internal and external calls.

However I have 3 users unable to make outgoing Internal/external calls, but can receive calls.

When they try to make a call they receive we receive the below error...…

Call Failed

Sorry, an error occurred during the call. you may want to send a diagnostic report (Menu: settings/general).

Any help would be great.

Andy


Offline andy

  • New Member
  • *
  • Posts: 2
  • Country: gb
  • Karma: +1/-0
    • View Profile
Re: MiCollab softphone - call failed
« Reply #1 on: January 27, 2020, 10:12:55 AM »
I have discovered what the problem was, PRG didn't have the softphone included - once added I could make calls.

Instead of deleting this post I have decided to leave it here, as its taken me a couple of days to resolve.

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: MiCollab softphone - call failed
« Reply #2 on: January 28, 2020, 04:20:08 AM »
Good job on working that out, as an FYI the same applies for MDUG (Multi Device User Group)

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: MiCollab softphone - call failed
« Reply #3 on: January 28, 2020, 07:31:33 PM »
Good job on working that out, as an FYI the same applies for MDUG (Multi Device User Group)

This is why you should provision the users through Users and Services on the MiCollab side, it creates the MDUG for you.


 

Sitemap 1 2 3 4 5 6 7 8 9 10