Author Topic: Mitel 5000 PRI to Analog port for faxing  (Read 1988 times)

Offline sirios34

  • Contributer
  • *
  • Posts: 5
  • Country: us
  • Karma: +0/-0
    • View Profile
Mitel 5000 PRI to Analog port for faxing
« on: September 17, 2018, 04:38:33 PM »
I have a client that just switched to a PRI from analog lines. When they did this, they lost their analog lines so now they can not fax right now.
Is there a way to forward an incoming call from the PRI to one of the LSM ports on the Mitel and attach a fax machine to it?

Thanks


Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 692
  • Country: us
  • Karma: +17/-0
    • View Profile
Re: Mitel 5000 PRI to Analog port for faxing
« Reply #1 on: September 17, 2018, 04:54:19 PM »
You can fax over PRI. The switch shouldn't be the issue as long as the fax number moved over to the PRI.

Offline sirios34

  • Contributer
  • *
  • Posts: 5
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Mitel 5000 PRI to Analog port for faxing
« Reply #2 on: September 17, 2018, 05:10:26 PM »
The number did move over, I just dont know how to get it to their fax machine.

Offline DND ON

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 908
  • Country: us
  • Karma: +23/-0
    • View Profile
Re: Mitel 5000 PRI to Analog port for faxing
« Reply #3 on: September 17, 2018, 06:10:51 PM »
Program the Call Routing Table and cross-connect an analog station port, not LSM port.
« Last Edit: September 17, 2018, 06:19:26 PM by DND ON »

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
Re: Mitel 5000 PRI to Analog port for faxing
« Reply #4 on: September 18, 2018, 06:57:55 AM »
Sirios34,

Don't forget to make it a house phone since the fax machine was tied to a POTS line before.

Thanks,

TE

Offline sirios34

  • Contributer
  • *
  • Posts: 5
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Mitel 5000 PRI to Analog port for faxing
« Reply #5 on: September 18, 2018, 11:50:12 AM »
Thanks for all your help, I got it to work. Moved it from the LSM port to an analog station port like DND ON suggested. Thanks again.


 

Sitemap 1 2 3 4 5 6 7 8 9 10