BRM-2 DSP Download Failed, Mainboard fault?

[NTEDave]

Got a newly installed system with a BRM-2, won't come online, logs say:

[25Oct17 16:55:33] bri_app[INFO]: Put DSP into reset
[25Oct17 16:55:33] bri_app[INFO]: dsp clear reset
[25Oct17 16:55:33] bri_app[ERR]: DSP 1 download did not verify at address 0x006B. Value 0x0002 should be 0x8204.
[25Oct17 16:55:33] bri_app[ERR]: verify_single FAILED!
[25Oct17 16:55:33] bri_app[ERR]: Download Failed, trying again . . .

Found another BRM-2 of unknown vintage in a colleagues van that is doing exactly the same thing.

SLM4 work in the same slots.

Anyone seen this before and was it the mainboard on the chassis or software?

Cheers.

[NTEDave]

This was a faulty mainboard if anyone is interested, had a new HX and mainboard delivered, put the compact flash and BRM-2 into it.

Booted up and working straight away.