Messages

1

Mitel MiVoice Business/MCD/3300 / Re: Buying 5330 IP Phone PN 50005804

« on: November 07, 2012, 04:09:49 PM »

Sure - it's less a "mode" and more simply a case of how you program it - the MCD 5.0 SP2 release notes:

5320e, 5330e and 5340e will be available from MCD 5.0 SP2.  These devices are compatible with the previous MCD releases.  Prior to MCD 5.0 SP2, these devices should be programmed as 5320, 5330 and 5340 accordingly. On an upgrade to MCD 5.0 SP2, the database is converted automatically to 5320e, 5330e and 5340e respectively.

(So, if you do deploy them in backwards compatibility "mode" now, when upgrading at a later date to MCD 5.0, it should convert the set type automagically too. 

2

Mitel MiVoice Business/MCD/3300 / Re: Buying 5330 IP Phone PN 50005804

« on: November 07, 2012, 03:47:24 PM »

Hi,

5320e/5330e/5340e are all backwards compatible, as below:

System Software Requirements
The Minimum System Software required to support the 5320e / 5330e / 5340e IP Phones:
•   Mitel Communications Director (MCD), Release 5.0 SP2
•   Mitel 5000 Communications Platform (CP) Release 5.1
•   Mitel Border Gateway (Teleworker Solution) Release 7.1
•   Mitel SX-200 IP Communications Platform (ICP) Release 5.0 (5330, 5340 only)
•   Mitel HTML Toolkit Release 2.2
•   SIP Release (TBD)

The 5320e, 5330e and 5340e operate as 5320, 5330 and 5340 Phones in Backwards Compatibility mode with the following System Software:
•   Mitel Communications Director (MCD) Release 4.0 SP1
•   Mitel 5000 CP Release 3.2
•   Mitel Border Gateway (Teleworker) Release 5.2 SP1
•   Mitel SX-200 ICP Release 4.0 UR3 (5330, 5340 Only)
•   Mitel HTML Toolkit Release 2.0

Thanks