Messages

1

Mitel MiVoice Business/MCD/3300 / Mitel controller

« on: July 12, 2017, 05:18:03 AM »

Hi ,

our controller randomly reboot once per day over this week, we do not set schedule...feeling hardware issue.

below is disk volumes stats.. attached

any idea how i can check the issue?

2

Mitel MiVoice Business/MCD/3300 / Re: FORWARD specfic outside number to one of office extension

« on: August 02, 2016, 11:09:54 PM »

Hi Ralph,

I want to forward an outside number that's not on my PBX to an internal extension number.

Thanks,

3

Mitel MiVoice Business/MCD/3300 / FORWARD specfic outside number to one of office extension

« on: July 29, 2016, 05:21:29 AM »

Hi ALL,

need your help that I want to setup to forward specific outside number to one of office extension...is it possible to do that?

Thanks,

4

Mitel MiVoice Business/MCD/3300 / Re: transport or codec mismatch

« on: July 15, 2016, 03:22:11 AM »

the license count by each SIP using ?

5

Mitel MiVoice Business/MCD/3300 / transport or codec mismatch

« on: July 13, 2016, 04:16:33 AM »

Hi, I used third party SIP vendor to route a did number provide to them forward to our PBX via SIP, I think they are using G729 code..and  mITEL 3300 USING g711..i guess.

there is no sounds when call to that did number...and I see transport or codec mismatch on mitel log..how can I resolve ?

6

Mitel MiVoice Business/MCD/3300 / SIP ..phone ring but no audio

« on: June 03, 2016, 03:39:41 AM »

Hi,

I implemented sip did route to our PBX IP..when I dial the DID number..the phone will ring ..but no audio..vendor ask me enable g.729 ON mitel..where I can enable it or in sip peer profile?

7

Mitel MiVoice Business/MCD/3300 / SIP trunk sound quality

« on: February 16, 2016, 12:15:57 AM »

Hi,

we subscribe two different country DID number that use the same sip server from provider to forward to our OWN IP pbx.

let said Italy DID sound quality was good , but london did sound quality was very poor.

for london, we can hear the ppls sounds from London clearly when they dial that number, but another side complaint poor sound quality, cant hear it clear.

any thought?

8

Mitel MiVoice Business/MCD/3300 / Re: SIP configuration

« on: December 23, 2015, 10:21:53 PM »

I adjust the registration timer ..it seems issue resolved

9

Mitel MiVoice Business/MCD/3300 / Re: SIP configuration

« on: December 23, 2015, 12:38:03 AM »

setting 4

10

Mitel MiVoice Business/MCD/3300 / Re: SIP configuration

« on: December 23, 2015, 12:37:42 AM »

setting 3

11

Mitel MiVoice Business/MCD/3300 / Re: SIP configuration

« on: December 23, 2015, 12:37:20 AM »

SETTING 2

12

Mitel MiVoice Business/MCD/3300 / Re: SIP configuration

« on: December 23, 2015, 12:36:49 AM »

I ATTACHED the config

13

Mitel MiVoice Business/MCD/3300 / Re: SIP configuration

« on: December 23, 2015, 12:32:36 AM »

try. didn't work. it still when I re-save the profile to re-register, then call the number, this number can forward to our PBX. After period of time, it will become unreachable again.

14

Mitel MiVoice Business/MCD/3300 / Re: SIP configuration

« on: December 22, 2015, 08:14:34 PM »

keep alive I set always

15

SIP On Mitel / SIP Configuration

« on: December 22, 2015, 09:00:55 AM »

Hi all,

I configure an SIP profile for external number dial in to our Mitel 3300 PBX that route to specific number. I guessing it was due to timeout, after period of time, when I dial that number it was unable to route to the specific number.

then I re-save the SIP profile , it will works again. all idea, or how to trace the root cause?