Messages

1

Mitel MiVoice Business/MCD/3300 / Re: Mxe controller restarts automatically

« on: January 17, 2016, 08:58:59 PM »

I have also case like that. As logs captured from the maintenance port at restarting.

=====================
x3d83880 (ASUTimersT3): Task called pure virtual function for which t
here is no definition
Critical Alarm being raised upon detecting the following task suspended: ASUTime
rsT3 taskId 0x3d83880 crash time SUN JAN 17 16:46:50 2016

Task SysPreMort0 being deleted while ACTIVE
WARNING-System shutdown requested by task: tTMonitor
Raised Critical Alarm on Stale Tasks
RaiseAlarm alarm severity critical, forcing machine shutdown

!!! HARDWARE RESET REQUEST FROM task HwReset !!!

16/01/17 16:47:49 - HardResetHookExecute called by task: HwReset


End HardResetHookExecute

/sysro/  - disk check in progress ...

Thx,
Angus


Angus U

2

Mitel MiVoice Business/MCD/3300 / Mitel Clustered Hospitality Report Print

« on: October 01, 2013, 11:18:51 PM »

Recently installed a Hospitality system MITEL 3300 MXe MCD 6.0 and two AX in a Hospitality Cluster. Clustered Hospitality Gateway Home Element: 3300ICP. PMS interface working fine. 5550IP x3 on 3300ICP. (LPR4, LPR5, LPR6)
All the guest room connected to that two AX.
Hotel/Motel status can't printing out via a printer set up on 5550IP RS-232 port. (LPR4)

We are via a telnet port 1753 to checking the two AX's Hotel/Motel status report can be printed on demand in two AX's controller. Add an extension as guest room on 3300 MXe for test. To print a report • On the Tools menu, select Guest Services followed by the command that corresponds to the report. It can be printed on demand only the testing guest room in the local controller.

How can be group the Hospitality Cluster Hotel/Motel reporting as gateway on the 5550IP or any solution?

3

Mitel MiVoice Business/MCD/3300 / Analog trunk blocked after trunk to trunk

« on: December 26, 2012, 11:00:54 PM »

I have a 3300 MxeIII with MCD5.0 and I have 10 analog trunks connected on it. The problem is sometimes the LS get blocked. I can unblocked or disconnect them manually from the command busy and rts.
The user insisted that transfer trunk to trunk feature. So, we can't disable the trunk to trunk feature on the system. How can be fixed this problem?

Does anybody know how to fix it?

4

Mitel MiVoice Business/MCD/3300 / MITEL 3300icp LAN port drop after system boot 15min

« on: September 17, 2012, 11:48:24 PM »

Hello

MITEL 3300icp LAN port drop after system boot 15min, all the Ip phone can't work.
But ASUII and the on board (6co+4ext) analog phones working fine.
BTW. Before the E2t card are installed, the system will automatic reboot while the LAN dropped after 20 min.

vito