Messages

1

Mitel MiVoice Business/MCD/3300 / Mitel - Openser/Kamailio/OpenSips

« on: September 21, 2010, 04:59:30 PM »

Hi!

Does anyone have tried to make this?

SIP Phone ----> Openser -----> Mitel -----> Mitel Phone

192.168.10.133 -> Sip Phone
200.xx.xx.xx -> OpenSer
192.168.2.1 -> Mitel ICP 3300

For some reason I can't make it work.

Code: [Select]

192.168.10.133 -> 200.xx.xx.xx SIP/SDP Request: INVITE sip:220@200.xx.xx.xx, with session description
200.xx.xx.xx -> 192.168.10.133 SIP Status: 100 Giving a try
200.xx.xx.xx -> 192.168.2.1  SIP/SDP Request: INVITE sip:220@200.xx.xx.xx, with session description
192.168.2.1 -> 200.xx.xx.xx SIP Status: 100 Trying
192.168.2.1 -> 200.xx.xx.xx SIP Status: 404 Not Found
404 Not Found -> How could it be? I'm dialing 220 (my extension). May be there is a secret for this trunk..

I have tried everything with "SIP PEER PROFILE" options.

Any help?
thanks

2

Mitel MiVoice Business/MCD/3300 / Re: Call Me Back Issue (sent by Voicemail

« on: May 03, 2010, 07:48:01 AM »

I'm sorry, I didn't explain very well.

When someone left a voicemail, on a randomly way the "call back" turns on (obviously the lamp turn on too).

I want just the lamp and not the "call back".

3

Mitel MiVoice Business/MCD/3300 / Call Me Back Issue (sent by Voicemail

« on: April 30, 2010, 03:16:31 PM »

Hi all!

I'm having this issue for a long time ago. The thing is:

Sometimes and JUST sometimes (I can not repeat it randomly) a few extensions receive a Call Me Back Message send from Hunt Group 15.

15 is the Hunt Group Number for calling to Voicemail. (15 was assigned for four voicemail ports).

I think is maybe a CoS thing, but I'm not sure.

Any idea?

Thanks a lot!

4

Mitel MiVoice Business/MCD/3300 / Re: SIP Trunk - I wanna see the trunk name.

« on: October 16, 2009, 10:00:21 AM »

I'm a such a dump!!! sorry all!

I set the CoS in Trunk Service Assignment, but I didnt in the extension.

Sorry!

(Thanks a lot Ralph!!!)

5

Mitel MiVoice Business/MCD/3300 / Re: SIP Trunk - I wanna see the trunk name.

« on: October 16, 2009, 08:23:36 AM »

Right now, I see the caller ID.

and yes, I have turned off everything ANI/DNIS display...

6

Mitel MiVoice Business/MCD/3300 / SIP Trunk - I wanna see the trunk name.

« on: October 15, 2009, 04:06:57 PM »

Hi all.

I have configurated a SIP trunk with some ISP. I have set two ports to this trunk also and these ports are used for attendant. I use the SIP PEER PROFILE BY INCOMING DID too (using "System Speed Call Asignment"). So, depending of the incoming number, it will go to ports (Attendant) or directly to extensions.

The thing is:

I wanna see the trunk's name on my Mitel display.

How can I do that?

- If I set "PRIVATE SIP TRUNK" I can see the name... but the attendant stops work. I mean, I dont hear the attendant voice, I hear the voicemail operator voice: "Please enter you VM number"...

PLEASE!! How can I see the trunk name!!!???

7

Mitel MiVoice Business/MCD/3300 / Re: Greeting Sip Trunk trough

« on: September 18, 2009, 12:08:14 PM »

SOLVED!

I set PRIVATE SIP TRUNK turn OFF...



thanks!

8

Mitel MiVoice Business/MCD/3300 / Greeting Sip Trunk trough [SOLVED]

« on: September 14, 2009, 01:31:14 PM »

Hi all.

I set a greeting in one port. I set this port as a destination from sip trunk, but when I get in trough sip trunk, i can hear teh operator: "please dial your voicemail number..."

Why? why I cant hear the greeting?

thanks!

9

Mitel MiVoice Business/MCD/3300 / Re: CallMe Back Messages

« on: May 29, 2009, 03:41:28 PM »

When somebody leaves me a message (voicemail), after listen it and delete it, I have to delete CallMe Back Message. I'm doing of this way:

1) I push Messaging
2) I push Read Message
3) I push Call Me Back
4) Erase Msg

After this, the lamp turn off.

But, I dont leave a call me back message, I just leave a Voicemail.

----

LOCATE FEATURE EXTENSION 220
IP Device ID:   23                                                             
Circuit Location : 1 3 1 23 1                                                   
Extension : 220                                                                 
Active Features :                                                               
Phone Lock: UnLocked                                                           
MAC Address : 08:00:0F:2D:C5:0E

10

Mitel MiVoice Business/MCD/3300 / Re: CallMe Back Messages

« on: May 29, 2009, 01:32:32 PM »

Oh! ok, Embedded.

Software: 9.0

It has to do with CoS... I'm sure.

11

Mitel MiVoice Business/MCD/3300 / Re: CallMe Back Messages

« on: May 29, 2009, 12:34:15 PM »

I'm sorry... what VM??

What thats mean? What kind of Voicemail? I don't know...

12

Mitel MiVoice Business/MCD/3300 / CallMe Back Messages

« on: May 29, 2009, 09:51:37 AM »

Hi all!

I have an issue with call me back messages.
When I leave a Voicemail, it create a call me back message. So, I have to delete the voicemail plus delete call me back message.

Why? I dont want the call me back message.

thanks!

13

Mitel MiVoice Business/MCD/3300 / Re: Redirect calls from 0 (operator) to extension

« on: May 07, 2009, 01:03:53 PM »

Something else...

the VM 0 has a recorded voice. I wanna delete it but I only can change it. How can I delete  the recorded voice?

14

Mitel MiVoice Business/MCD/3300 / Redirect calls from 0 (operator) to extension

« on: May 07, 2009, 12:07:44 PM »

Hi all!

Please! help me with this!

My PBX (Mitel 3300) have set two ports for attendant. "Thanks you for call... etc etc" if the caller doesn't dial any option, the call is redirect to VM 0 (operator).

This was working ok, but now, I want that when the caller wait and doesn't dial any option, they been redirect to some extension (by example: 200)

So, what I want is: If the caller doesn't dial any choice, the voice of the PBX say: "You will be transfered to Operator" and that extension 200 rings.

How I do that?

0 is the default VM of the PBX.

Thanks in advance

15

Mitel MiVoice Business/MCD/3300 / Re: Interconnect restriction trough Sip trunk

« on: May 05, 2009, 11:52:54 AM »

Ok Ralph, I will...

Thanks!