Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - untitledrob

Pages: [1]
1
Mitel MiVoice Business/MCD/3300 / Re: IP DECT 5610
« on: February 06, 2013, 05:38:07 AM »
SOLVED!!!

I had to basically re-register the phone!

So wipe the dect (reset button on the dect base stand) and import config file again and this time it read the phonebook csv and registered the handset

Thanks for all your help!

2
Mitel MiVoice Business/MCD/3300 / Re: IP DECT 5610
« on: February 04, 2013, 10:04:55 AM »
Yep firmware is 2.00..

Is there a later firmware than this does anyone know?

3
Mitel MiVoice Business/MCD/3300 / Re: IP DECT 5610
« on: January 28, 2013, 09:08:58 AM »
That's another point I was going to make..

How do i know the firmware on the phone?

The dect states 2.00

The line you indicate is the config file for the handset once imported this doesn't need to be there anymore

4
Mitel MiVoice Business/MCD/3300 / Re: IP DECT 5610
« on: January 28, 2013, 07:06:31 AM »
Yep I've followed that Guide exactly and still nothing being imported.

Yep I have a contact (book with telephone) icon on the handset.

5
Mitel MiVoice Business/MCD/3300 / Re: IP DECT 5610
« on: January 28, 2013, 05:38:15 AM »

Hello

Please find below results on the debug page. It says that the phonebook is downloaded but can not see this on the handset. Under management transfer protocol it just has a 0 next to it. Maybe someone can send me a template of the csv file they use because I'm thinking it must be the layout of the content:

0101000000 [N](01):DHCP Enabled
0101000000 [N](01):IP Address: 172.22.128.52
0101000000 [N](01):Gateway Address: 172.22.128.1
0101000000 [N](01):Subnet Mask: 255.255.255.0
0101000000 [N](01):TFTP boot server not set by DHCP. Using Static.
0101000000 [N](01):DHCP Discover completed
0101000000 [N](01):FWU: DEVICE_NOTIFY_IND Device#1 State#0 PRESENT
0101000000 [N](01):Time Server: 172.22.128.1
0101000000 [N](01):Boot server: 172.22.129.5 path: Config/ Type: TFTP
0101000000 [N](01):RemCfg: Download request of Config/08000f44b02c.cry from 172.22.129.5 using TFTP
0101000000 [N](01):RemCfg: Download request of Config/08000f44b02c.cfg from 172.22.129.5 using TFTP
0101000000 [N](01):RemCfg: Download request of Config/08000f44b02c.cry from 172.22.129.5 using TFTP
0101000000 [N](01):RemCfg: Download request of Config/08000f44b02c.cfg from 172.22.129.5 using TFTP
0101000000 [W](01):Load of Config/08000f44b02c.cfg from 172.22.129.5 failed
0101000000 [W](01):Phonebook download started
0101000000 [N](01):RemCfg: Download request of Config/phonebook.csv from 172.22.129.5 using TFTP
0101000000 [N](01):Gateway/02.00
0101000000 [N](01):MAC=08000F44B02C, SER= 65535, HW=2
0101000000 [N](01):Stun detection disabled
0101000000 [N](01):FWU: UPANDRUNNING
0101000000 [N](01):FWU: AutoUpdCheck Start Abs time
0101000000 [N](01):Error Log Fp (count=0, assertline=0)
0101000000 [N](01): Fp0: err=0, task=0
0101000000 [N](01): Fp1: err=0, task=0
0101000000 [N](01): Fp2: err=0, task=0
0101000000 [N](01):Error Log Bf (a=0, r=0, keepalive=0)
0101000000 [N](01): Bf0: t=0, l=0, f=, d=0,0,0,0,0,0
0101000000 [N](01): Bf1: t=0, l=0, f=, d=0,0,0,0,0,0
0101000000 [N](01): Bf2: t=0, l=0, f=, d=0,0,0,0,0,0
0101000000 [N](01):GMT offset = 0 seconds
0101000000 [N](01):DECT Mode: EU
0101000000 [N](01):Registering UA#0 on domain 172.22.129.5
0101000000 [N](01):UaRtxMwiCreateMsgWaitCtrl for UA#0
0101000000 [N](01):RcvIp not used (Local Server Selected)
0101000000 [N](01):Registration of user 6603 at UA#0 succeeded
0101000000 [N](01):UA: Keep alive started; Time interval: 90s
0101000001 [N](01):Message Waiting Notify received with changed info for UA#0; VoiceTotal:1; VoiceNew:1
0128103236 [N](01): Time Synchronized with time server
0128103239 [N](01):FWU: DEVICE_NOTIFY_IND Device#0 State#0 PRESENT

6
Mitel MiVoice Business/MCD/3300 / Re: IP DECT 5610
« on: January 25, 2013, 04:20:50 PM »

I have tried all csv formats from 2003-2010 and also the ms-dos format and nothing works hmmm...

Im thinking now maybe it has something to do with the .cfg file there is a "tag" which says
%common_phonebook%:0  i've tried with a 1 in place but still no luck. I wonder if there is a value I need to insert.

It's obviously polling the tftp as the firmware was pushed to handsets and it also reads the .cfg file.

Any more suggestions?


7
Mitel MiVoice Business/MCD/3300 / Re: IP DECT 5610
« on: January 25, 2013, 12:58:30 PM »
Yes I have rebooted..

I also tested with a .cfg file of a handset. The DECT successfully polls for this but never the csv file.
I was told to upgrade to 2.00 and I have upgraded and the import still doesnt work.

Super confused now..Is there anything else I'm missing?

8
Mitel MiVoice Business/MCD/3300 / Re: IP DECT 5610
« on: January 25, 2013, 11:57:12 AM »
Awesome! and thnaks very much!

I upgraded our firmware by pointing the Dect to out Mitel3300 which was hosting the firmware files in the
/sysro/tftp folder.

However, I can't seem to import the phonebook.csv file.
The DECT detects .cfg files but never the csv.
I made the .csv using excel 2010.

Any ideas?

9
Mitel MiVoice Business/MCD/3300 / Re: IP DECT 5610
« on: January 22, 2013, 05:13:41 AM »
Thanks this is great!

seems that the firmware I have on the dect is 1.00 and the release notes state upgrade is from
1.04 to 2.00. Is there a 1.04 firmware?

Thanks for all your help!

10
Mitel MiVoice Business/MCD/3300 / IP DECT 5610
« on: January 18, 2013, 07:42:11 AM »
Hello

Currently we are on version 1.00 of the IP DECT Firmware and I would like to upgrade this so I can import a .csv of the telephone directory. We have a reseller for our Mitel system and unfortunately they won't let me try this by myself.
I was wondering if anyone had the documentation and firmware so I can do this and also the method to upload a .csv in to the dect.
Any Help would be appreciated

11
Mitel Software Applications / UCA Mobile For Blackberry
« on: September 16, 2011, 08:39:59 AM »
Hi All

Wonder if anyone can shed some light. Im quite a Newb at Mitel but was investigating the UCA for Blackberry app. I have managed to install the app but not sure on how to get the officelink function working.We have UCA Blackberry licenses however Im not sure if we also need a license to use the officelink function or how to set this up properly?

Can anyone shed some light on how to get started..

Thanks

Pages: [1]