Messages

1

Mitel SX200, SX2000, and older SX platforms / Re: Mitel SX50 - Printing outgoing calls.

« on: August 10, 2011, 03:45:08 PM »

http://i51.tinypic.com/if1hth.jpg

This is from mitel http://i51.tinypic.com/ofrc3n.jpg

Converter from mitel to computer via USB

2

Mitel SX200, SX2000, and older SX platforms / Re: Mitel SX50 - Printing outgoing calls.

« on: August 10, 2011, 03:21:41 PM »

http://www.startech.com/Cards-Adapters/Serial-Cards-Adapters/USB-to-RS232-DB9-Serial-Adapter-Cable-Male-to-Male-Serial-Adapter-USB-to-Serial~ICUSB232
http://www.startech.com/Cables/Serial-Parallel-PS-2/DB9-DB25/DB9-to-DB25-Serial-Cable-Adapter-Female-to-Female~AT925FF

With those cables.

I got it to connected on hyperterminal but it doesnt print/echo or capture any of text. when I set wake up calls and cancel wake up calls.

3

Mitel SX200, SX2000, and older SX platforms / Re: Mitel SX50 - Printing outgoing calls.

« on: August 10, 2011, 02:48:23 PM »

I'll try that here in second but what is this pin strap thing? i havent done that yet.

Thanks

4

Mitel SX200, SX2000, and older SX platforms / Re: Mitel SX50 - Printing outgoing calls.

« on: August 10, 2011, 01:28:13 PM »

Just got those cables and I tried to open hyperterm with COM1 port. (thats what its assigned on device manager)

Hyperterm says unable to open check port settings. Its currently at defaults. 9600bits-per-second, 8 data bits, parity is none, stop bits is 1, flow control is none.

What combinations would you suggest me try?/

Thanks

5

Mitel SX200, SX2000, and older SX platforms / Re: Mitel SX50 - Printing outgoing calls.

« on: August 09, 2011, 05:52:10 PM »

I was using wrong type of cable. I called startech.com and asked for help and they advised me with these cable so it displays as COM ports on computer then I can use hyperterminal, putty to access those COM ports.

http://www.startech.com/Cards-Adapters/Serial-Cards-Adapters/USB-to-RS232-DB9-Serial-Adapter-Cable-Male-to-Male-Serial-Adapter-USB-to-Serial~ICUSB232
http://www.startech.com/Cables/Serial-Parallel-PS-2/DB9-DB25/DB9-to-DB25-Serial-Cable-Adapter-Female-to-Female~AT925FF

6

Mitel SX200, SX2000, and older SX platforms / Re: Mitel SX50 - Printing outgoing calls.

« on: August 07, 2011, 12:45:33 AM »

I tried that but When i open hyperterm on COM3 nothing displays on my screen. I tried setting wake up call so it would print but nothing shows up on hyper term. The 24pin to usb shows up as USBPrinting device under device manager.

I tried connecting to all COM's just to see which COM it was using COM3 was only one that opened but nothing happens on screen.

Thanks

7

Mitel SX200, SX2000, and older SX platforms / Mitel SX50 - Printing outgoing calls.

« on: August 06, 2011, 01:22:09 AM »

I know this is wrong thread to post on but I am in need of help badly.

We have mitel sx50 which prints outgoing calls to Espon dot matix printer. It prints extension and number dailed along with time. Its 24? pin serial from mitel box to espon dot matrix printer.

I want to hook that serial from mitel to laptop so it prints on computer instead of wasting paper, space in office. My laptop does not have serial port so I got 24pin to usb converter but I need to find a program that recognize the printer and logs/prints outgoing calls on computer.

Please advise.

Thanks