1
Mitel MiVoice Business/MCD/3300 / Re: One-way audio only when transering from Nupoint?
« on: September 17, 2011, 02:43:54 AM »
Do you have any IPS running on your network? Any firewall between the applications?
News:
Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Mitel MiVoice Business/MCD/3300 / Re: Calls to Lync over SIP are showing as Busy
« on: September 17, 2011, 02:42:50 AM »
done mate thanks. I've also exported the forms here for anyone else to have a look if they're having similar issues:
http://www.megaupload.com/?d=VB9VO750
http://www.megaupload.com/?d=VB9VO750
3
Mitel MiVoice Business/MCD/3300 / Calls to Lync over SIP are showing as Busy
« on: September 16, 2011, 06:33:29 AM »
This is driving me mental!! 
I've programmed the SIP trunk over to Lync as per the MOL guide and I just can't get it to work. I'm pretty sure the calls are hitting the Lync server but then my 5224 desk phone just shows busy.
Active Rejected Non-Auth Calls Auth Calls Auth Failures
Profile Calls Calls Incoming Outgoing Incoming Outgoing Incoming Outgoing
Lync 0 4 0 2 0 0 0 0
Total 0 4 0 2 0 0 0 0
There are 1 SIP link(s) programmed.
Link Lync state is IN SERVICE (link down count 0)
I now get the above. The output is showing calls as either Rejected or Non-Auth. When I'm dialling 4222 from my mitel desk phone (which is the dial in conf number on lync) it's coming as non auth. Is there a security setting I'm missing??
I've programmed the SIP trunk over to Lync as per the MOL guide and I just can't get it to work. I'm pretty sure the calls are hitting the Lync server but then my 5224 desk phone just shows busy.
Active Rejected Non-Auth Calls Auth Calls Auth Failures
Profile Calls Calls Incoming Outgoing Incoming Outgoing Incoming Outgoing
Lync 0 4 0 2 0 0 0 0
Total 0 4 0 2 0 0 0 0
There are 1 SIP link(s) programmed.
Link Lync state is IN SERVICE (link down count 0)
I now get the above. The output is showing calls as either Rejected or Non-Auth. When I'm dialling 4222 from my mitel desk phone (which is the dial in conf number on lync) it's coming as non auth. Is there a security setting I'm missing??
4
Mitel MiVoice Business/MCD/3300 / Re: Using a Mitel Handset on Lync 2010
« on: September 12, 2011, 11:48:46 AM »
Thanks. I'm running lync 2010 standard so the mediation server is "lync.domain.com"?? Do I need to put sip: in front? What dns entries are needed?
5
Mitel MiVoice Business/MCD/3300 / Using a Mitel Handset on Lync 2010
« on: September 12, 2011, 10:39:27 AM »
I've booted my 5224 into SIP mode and am trying to register the handset with the lync server. Has anyone managed to do this before? What settings do I need to enter on the phone's config web page?
Pages: [1]