Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - choodmold

Pages: [1]
1
SIP On Mitel / Re: Mitel Telephony - Silent Call Issues
« on: October 02, 2024, 11:25:26 AM »
I refer to MITEL MSP (Managed Service Provider) a company that provides us with a SAAS contact centre platform.

Could you advise on how we can share these tug logs? it's something I'm not familiar with, are these to be pulled from the MiVB server?

2
SIP On Mitel / Re: Mitel Telephony - Silent Call Issues
« on: October 02, 2024, 10:49:20 AM »
The company I work for is predominantly a hybrid workplace with agents using the Micollab SIP application to accept incoming calls or to make outbound calls, the 6920 SIP physical phones we setup were only used for trial, but with the issue is so sporadic some agents can have a good run whereby silent calls on either end don't occur for hours, possibly day/s which means we've not been able to accurately confirm if this replicable for "back office" users, however to confirm from your question; we have tried outbounding to our personal mobile numbers using a test Mitel account (using physical desk phones & Micollab SIP application) and haven't been able to replicate, but the issue is we wouldn't be able to test long enough to confirm, if that makes sense? 

3
SIP On Mitel / Re: Mitel Telephony - Silent Call Issues
« on: October 02, 2024, 10:15:56 AM »
Correct, the official Mitel 6920 SIP phones are routing through the MiVB, We haven't been able to replicate the silence internally, only when an agent takes a call through the SIP trunks.

4
SIP On Mitel / Mitel Telephony - Silent Call Issues
« on: October 02, 2024, 10:03:48 AM »
Hello,

I’m hoping someone can shed some light on these silent calls issue that occurs globally through our contact centre, this has now been going on for just over 2 years with 3rd party venders getting involved, Mitel MSPs and internally reviewing our network and settings.

The sporadic issue we get (using the Micollab SIP application with the Ignite web dashboard open) the agent will accept calls and either the customer cannot hear the agent, or vice versa the agent cannot hear the customer. Below are several attempts at eliminating this issue but we are now clutching at straws.

  • Replacement headsets/ different brands headsets (USB A&C)

    Made changes to user’s audio settings / preferences advised by MITEL MSP (exclusive mode/ hardware acceleration/audio enhancements)

    Installed all latest BIOS/Chipset software/ drivers

    Replaced laptop (tested with different brand laptop Dell/HP)

    Created isolated image with just Mitel software on (issue occurs on win10 & 11)

    Installed different audio drivers/software, including direct drivers for headsets being used, also any sound filter/processing tools to see if any difference

    Created new AD accounts/ Mitel accounts

    MIVB server has been rebooted – completed by MITEL MSP

    SIP MBG server has been rebooted - completed by MITEL MSP

    MITEL MSP hard coded system to G711 codec (it was suggested that they are seeing a lot of discarding RTP with unallowed codec)

    MiCC server upgrade 9.4.1 / Micollab software upgrade (9.8.112)

    Silent calls are replicable across office network and VPN

    Physical Mitel desk phones configured and tested (issues still occur)

    Multiple traces sent (Wireshark)and captured by MITEL MSP but cannot locate any example

    Our network MSP confirmed SIP AGL was disabled per Mitel MSP suggestion


The only unofficial fix we have is to completely remove any audio drivers and USB bus drivers and asking the user to reboot, although this is only bandage for some, the silent call issue can return on the next call or after several. - TO NOTE - out of curiosity if the agent receives a silent call if they make a call through MS TEAMS or other means the audio between both parties are fine. 
 

Any suggestions or input would highly be appreciated!!

Pages: [1]