Show Posts
1
Mitel MiVoice Business/MCD/3300 / Re: definitive Shell command guide?
« on: May 16, 2011, 05:49:53 PM »
hey guys, thanks for all the commands so far, you've made my life much easier.
To access the desktop, connect the server lan port to your network card and make sure the network card is on the same subnet as the server. Open internet explorer and go to https://[IP address of Server]/main.htm (without [ ]). Download and install the certificate and you should be able to access the tools once you log in. If you still can't access the desktop tool, then your account is not configured for it. To configure it, go to the system administration tool, then users and devices -> user and device configuration, double-click on your directory name or number then go to Access and Authentication and check the desktop admin box.
I now have a question of my own. Does anyone know if it's possible to configure the layer 2 switch ip address through the RTC shell? I'm using the Mxe III version of the 3300ICP.
Thanks again.
Aelarth
To access the desktop, connect the server lan port to your network card and make sure the network card is on the same subnet as the server. Open internet explorer and go to https://[IP address of Server]/main.htm (without [ ]). Download and install the certificate and you should be able to access the tools once you log in. If you still can't access the desktop tool, then your account is not configured for it. To configure it, go to the system administration tool, then users and devices -> user and device configuration, double-click on your directory name or number then go to Access and Authentication and check the desktop admin box.
I now have a question of my own. Does anyone know if it's possible to configure the layer 2 switch ip address through the RTC shell? I'm using the Mxe III version of the 3300ICP.
Thanks again.
Aelarth