Messages

1

Aastra - MiVoice Office 400 and MiVoice MX-One / MiVoice 400

« on: January 17, 2022, 07:08:23 AM »

Hello All,

We are struggling with one way voice on our Mivoice 470, we got one way audio calls, problem is that we cannot change anything under VoiP Tab, when we tried to put NAT IP or choose SIP signaling address (RFC3581), website just refreshing, refreshing, and after manual refresh we do not see such changes, anything more need to be "marked" to be able to change anything under VoiP Tab?

another mivoice 470 we got hasn't got such issues, and all can be insert/changed on VoiP Tab

appreciate some feedback on this matter,

kind regards
Wojtek,

2

Aastra - MiVoice Office 400 and MiVoice MX-One / Mitel 470 SIP trunk one way voice

« on: January 14, 2022, 05:36:44 AM »

Hello All,

I got a problem with Mitel 470 on SIP trunk, there is one way voice behaviour. Voice is going out from Mitel, but mitel do not receive external calls voice. There is an SBC connected into Mitel, and going via SBC to Provider Box. We can see traffic on traces, invite, ringing, etc. But voice is just going out of the Mitel PBX, no coming voice into it.

Any idea?

kind regards
Wojtek,

3

Aastra - MiVoice Office 400 and MiVoice MX-One / Mitel 470 Permission set/digit barring

« on: July 02, 2021, 05:07:59 AM »

Hello All,

I'm struggling with a permission set/digit barring setup on new Mitel 470. I've set below for in country only calls,

Permission set and barred list in attached,

Even if user/terminal has such above permission set I can dial abroad...

any Idea?

4

Aastra - MiVoice Office 400 and MiVoice MX-One / Re: Star codes *#01 on Mitel 470

« on: June 29, 2021, 10:30:44 AM »

Hello Bojo,

Thanks for replay, I've sorted this out by abbr dial with a different codes,

cheers
Wojtek

5

Aastra - MiVoice Office 400 and MiVoice MX-One / Star codes *#01 on Mitel 470

« on: June 22, 2021, 05:31:50 AM »

Hello All,

I would like to ask you to clarify "star codes" function on Mitel 470, we will got 170 analog phones AKD-5103 (AEI),

I need to know how I can setup star codes on such PBX

for example

Virtual codes   Code   value   Remarks
Front Desk    *#01    9   
Wake Up        *#02    PBX code
Emergency *#03   112   
Message         *#04   9   


also codes

6 for room to room call
9 to call operator desk

I've found a FAC codes but just for DECT system only,

would appreciate some feedback

Wojtek,