Messages

1

Aastra - MiVoice Office 400 and MiVoice MX-One / Connect Mitel 470 to Yealink TG400 GSM gateway

« on: May 25, 2022, 11:37:03 PM »

HI Team,

I would like to use a GSM gateway at my office. This is to lower the costs of calls from my VOIP phones to the GSM network.
Is there a manual or documentation that can show me how to connect my Mitel 470 to the Yealink TG400 Gateway. For the TG400 manual its shows
how to setup the connection for that?

But i can't seem to find any documentation or guide for the 470.

Thanks

2

Aastra - MiVoice Office 400 and MiVoice MX-One / Re: SIP error message Not Enough License in PBX

« on: May 10, 2020, 08:31:12 PM »

@zoo
I have deleted the terminals like you have suggested but still the license error persists.
I have checked the License section and it gives me the following status:


Terminals:                                              License:
MiVoice5300 IP Phones                          1
Mitel SIP Terminals                                 89
SIP Terminals                                          1

I currently have 94 terminals created on the Web client. 91 terminals are registered.
Only 3 are not registered.

3

Aastra - MiVoice Office 400 and MiVoice MX-One / Re: SIP error message Not Enough License in PBX

« on: May 05, 2020, 06:06:53 PM »

@bojo387  sorry for the late reply.

My PBX software version is

System software
                                                       Application                                           Boot
Version                                                      8719a1                                           8719a1
Date                                                              12.09.2016                      12.09.2016

And yes i use WebAdmin Access.

4

Aastra - MiVoice Office 400 and MiVoice MX-One / Re: SIP error message Not Enough License in PBX

« on: April 03, 2020, 07:15:50 PM »

I have about 95 sip extensions on the network. And yes that particular extension may have connected last when all the other licenses were used up.
How do i check whether i have enough licenses available?? I am using Mitel 470 as a communications server.

5

Aastra - MiVoice Office 400 and MiVoice MX-One / SIP error message Not Enough License in PBX

« on: April 02, 2020, 09:18:03 PM »

Hi Team,

One of my SIP Terminals is showing the error message on the LED Display.

Error. Not Enough license in PBX.

I cannot call or receive calls from that SIP Extension.

HELP!!