Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - TaterSalad

Pages: [1]
1
Mitel MiVoice Business/MCD/3300 / Re: MiVoice downgrade 9.0SP3 to 8.0SP2
« on: January 28, 2020, 04:44:24 PM »
Thanks august!

Mitel calls the procedure a Reverse Migration.  The guide says to run a command to downgrade uboot to vxworks and perform a manual installation.

2
Mitel MiVoice Business/MCD/3300 / Re: MiVoice downgrade 9.0SP3 to 8.0SP2
« on: January 10, 2020, 05:48:17 PM »
Thanks for the replies:

john, i didn't find downgrading that applied to going from 9 to 8 in the THB.

acejavelin, I had a spare ssd from Mitel and it had 8.0SP1 on it.  I installed the ssd and booted my lab machine and ran the upgradebootrom from maintenance window.  This gave me vxworks and I was able to install 8 using the manual procedure.

3
Mitel MiVoice Business/MCD/3300 / MiVoice downgrade 9.0SP3 to 8.0SP2
« on: January 09, 2020, 06:25:43 PM »
I ran an upgrade on my lab system yesterday from 8.0SP2 (14.0.1.29) to 9.0SP3 (9.0.3.15).  The upgrade took about 4 hours which included a manual database restore.  I ended up getting a licensing error and believe this is why the database restore failed.  I want to test the upgrade again but after accessing the console I see version 9 has a different command set.  I looked at the THB and see the instructions including the setenv commands for a manual software load in 9.0 code and instruction to point to ppc image.  I'm wondering if anyone has experience with downgrading from 9.0 to 8.0 and if they could provide any guidance.  Thanks in advance.

Pages: [1]