Messages

1

MiVoice Office 250/Mitel 5000 / Re: PSUEDO DISA

« on: May 30, 2019, 09:46:07 AM »

Corporate and 2 other sites have MCD.  the corporate MCD is connected to the first 250 via sip trunks.  From there all of the 250's are networked together.  I can definitely set up ARS from the MCD's to hit the main 250. Then set up ARS  at each and every 250 from there?  They have over 30 sites that are networked.  with who knows how many local area codes in each.  This could take quite a few hours of programming to accomplish and keep updated.  WOW!

2

MiVoice Office 250/Mitel 5000 / Re: PSUEDO DISA

« on: May 30, 2019, 08:23:48 AM »

Sorry guys, I forgot to mention this was on a combination of the 3300 and MiVoice 250 Platform.  doing ARS on the 3300 would be no problem, but I have had issues with the 250 not working like I plan.

3

MiVoice Office 250/Mitel 5000 / PSUEDO DISA

« on: May 28, 2019, 11:55:52 AM »

I am trying to set up a pseudo DISA situation between multiple networked sites. The customer is trying to utilize the trunks at all of their outlying locations.  For example: a person in Denver wants to make a call that would be local in Chicago, they want to dial a 4 digit extension to give them access to the Chicago switch and dial the local number.

I have it set up that each location can dial a phantom that is remote forwarded to grab an outside line.  if you dial it from that location, you can get an outside line and dial just fine, but if Denver calls Chicago's 4 digit code, they get a message stating  "ARS" and no second dial tone.

I can set up a DID to dial this phantom and it works fine (defeats the purpose though), but if it trys to go across the network, it does not give the second dial tone to dial locally.

Any ideas would be helpful.

4

MiVoice Office 250/Mitel 5000 / Re: Attendant Console in Demo Mode

« on: May 28, 2019, 11:43:59 AM »

I also figured out that if you download the latest version of Sentinel Hasp, this takes care of the issue also.

5

MiVoice Office 250/Mitel 5000 / Re: Attendant Console in Demo Mode

« on: May 16, 2019, 01:00:21 PM »

I am also having the same issue.  Not finding the tool to make it work. 

Brookster68, did you find a solution?