1
Mitel MiVoice Business/MCD/3300 / Re: Connecting Mitel phones over a VPN
« on: October 03, 2018, 08:44:08 AM »
WooHoo! I have answered my own question via trial and error!!
I was able to add new option 3 (applied only to the remote subnet) by ignoring the 'Standard option' drop down list, and merely specifying ID 3.
I set the router IP value in this new option 3 to that of the remote site.
This resulted in no change in symptoms.
Leaving the new option 3 in place, I deleted the VLAN=11 and l2p=6 from the new option 125, reset the phone and Voila!
With these elements removed, and the new option 125 once again identical to the existing Global one, I deleted the new one.
All still works a treat!
Every day's a school day they say. It has been a challenging and frustrating project, but, I am richer for the experience!
Much appreciate all the feedback given and hopefully, this thread will help somebody else?
I was able to add new option 3 (applied only to the remote subnet) by ignoring the 'Standard option' drop down list, and merely specifying ID 3.
I set the router IP value in this new option 3 to that of the remote site.
This resulted in no change in symptoms.
Leaving the new option 3 in place, I deleted the VLAN=11 and l2p=6 from the new option 125, reset the phone and Voila!
With these elements removed, and the new option 125 once again identical to the existing Global one, I deleted the new one.
All still works a treat!
Every day's a school day they say. It has been a challenging and frustrating project, but, I am richer for the experience!
Much appreciate all the feedback given and hopefully, this thread will help somebody else?