Messages

1

Mitel Software Applications / Re: Unable ro register using internal wifi connection

« on: September 14, 2018, 05:04:58 AM »

just to update managed to get Micollab apps using our wifi network by pointing the internal DNS entry to the public IP address.

but I still need to find out what causing the issue, I suspect some firewall rules overlapping reason why some ports cannot pass thru via wifi.

thanks ALL

2

Mitel Software Applications / Re: Unable ro register using internal wifi connection

« on: September 12, 2018, 10:43:35 PM »

@sarond: noted thanks for the advice. When I used the public IP using Wifi network yes TNA is a pass. I'm thinking to point the internal DNS to point externally to the public IP instead of going thru 10.26.200.xx not sure if this will work though.

@acejavelin: Yes 10.26.0.0/16 is already configured on the trusted networks.

3

Mitel Software Applications / Unable ro register using internal wifi connection

« on: September 12, 2018, 12:15:47 AM »

Hi All,

We have just implemented MiCollab service by Mitel on our environment. Using the Mitel MiCollab apps to Android we can successfully connect to the server and do normal in/outgoing calls using 4G/3G BUT for some reason, we are NOT able to connect to the server when we're using internal wifi connection it shows "Cannot connect to the server"

Using the Teleworker Network Analysis TCP port are showing closed when tapping wifi connection, but UDP ports are OK.

We are using Aruba System for our Wifi, also as per the Aruba Engineer no ports are being blocked/filtered on the Aruba Controller.

We are using PFsense for our firewall we are already verified we ALLOW ALL traffic from/to our wifi network.

I have attached the TNA results for both 4G and Wifi.

Any advice and recommendation will be greatly appreciated.

Thanks,
A