Messages

1

Mitel Software Applications / MI collab, Export FCOS and LCOS

« on: November 01, 2021, 08:43:32 PM »

Is there a way to Export/save the NPM FCOS and LCOS to a file?
Have been asked to send Configurations to send.

Thank You

2

SIP On Mitel / Re: Add and remove a Prefix to DN on 3300's to connect to a new PBX attached

« on: June 25, 2021, 10:32:52 AM »

Resolved this by adding.
ARS digits dialed *66
ARS digits modification to absorb 4

Speed dial for 7777 to be directed to the SIP trunk *667777.

Thank you!

Sent from my SM-G973W using Tapatalk

3

SIP On Mitel / Re: Call from MITEL 3300 SIP to 2nd PBX, Call drops after 44seconds

« on: June 25, 2021, 10:25:40 AM »

My apologies for not getting back to this.
The problem was due to Firewalls and multiple 3300's.
The RTP flow was not directed properly because it needed a proxy.

Thak you

Sent from my SM-G973W using Tapatalk

4

Mitel MiVoice Business/MCD/3300 / SIP PEER Profile cannot be deleted .

« on: May 18, 2021, 07:59:33 PM »

Cannot be deleted or change the Label.
It shows the Peer has an ARS Route assigned. I have deleted all ARS Routes, Digits Dialed, Digit Mods.
Had someone else check.
Can find anything connecting to the SIP.

Is there a Maintenance Command to trace where the link might be?


Sent from my SM-G973W using Tapatalk

5

Mitel MiVoice Business/MCD/3300 / SIP PEER Profile cannot be deleted .

« on: May 18, 2021, 07:59:00 PM »

Cannot be deleted or change the Label.
It shows the Peer has an ARS Route assigned. I have deleted all ARS Routes, Digits Dialed, Digit Mods.
Had someone else check.
Can find anything connecting to the SIP.

Is there a Maintenance Command to trace where the link might be?


Sent from my SM-G973W using Tapatalk

6

Mitel MiVoice Business/MCD/3300 / SIP PEER Profile cannot be deleted .

« on: May 18, 2021, 07:57:57 PM »

Cannot be deleted or change the Label.
It shows the Peer has an ARS Route assigned. I have deleted all ARS Routes, Digits Dialed, Digit Mods.
Had someone else check.
Can find anything connecting to the SIP.

Is there a Maintenance Command to trace where the link might be?


Sent from my SM-G973W using Tapatalk

7

Mitel MiVoice Business/MCD/3300 / SIP PEER Profile cannot be deleted .

« on: May 18, 2021, 07:57:42 PM »

Cannot be deleted or change the Label.
It shows the Peer has an ARS Route assigned. I have deleted all ARS Routes, Digits Dialed, Digit Mods.
Had someone else check.
Can find anything connecting to the SIP.

Is there a Maintenance Command to trace where the link might be?


Sent from my SM-G973W using Tapatalk

8

SIP On Mitel / Call from MITEL 3300 SIP to 2nd PBX, Call drops after 44seconds

« on: May 13, 2021, 10:56:39 PM »

Hello!
We have a 3300 connected through a SIP Trunk to a 2nd PBX.
When a call is made from the MITEL the call drops after 44seconds.
The Mitel goes Quiet. The 2nd PBX phone gives Dial tone.
This is true for Analog and VOIP.
Call is good from 2nd PBX to MITEL.

Session  Timer  on both are 90 sec .
Is there a timer that may cause this in the SIP PEER.

9

SIP On Mitel / Re: Add and remove a Prefix to DN on 3300's to connect to a new PBX attached

« on: May 06, 2021, 08:56:26 PM »

Actually.
The goal was to use a speed dial.
1234 to go to the new PBX.
So the ARS digits dialed were *66 with 4 digits to follow.
The Digit Modification was to absorb the 3Digits (*66)

Then speed dial
1234 = actual number *661234
All good now.

Tank you for the direction.

Sent from my SM-G973W using Tapatalk

10

SIP On Mitel / Re: Add and remove a Prefix to DN on 3300's to connect to a new PBX attached

« on: May 06, 2021, 03:40:11 PM »

Awe the light came on the *66 had to be put into the ARS DIGITS DIALED

Sent from my SM-G973W using Tapatalk

11

SIP On Mitel / Re: Add and remove a Prefix to DN on 3300's to connect to a new PBX attached

« on: May 06, 2021, 01:54:12 PM »

Sorry forgot to say I removed the ARS digits dialed!

Sent from my SM-G973W using Tapatalk

12

SIP On Mitel / Re: Add and remove a Prefix to DN on 3300's to connect to a new PBX attached

« on: May 06, 2021, 01:52:49 PM »

No I had the ARS DIGITS working without the insertion and removal of *66.
The Engineers of the System want it to be done using Speed dials . Which need to use the *66 to be directed to the ARS  ROUTE to the SIP trunk.

Sent from my SM-G973W using Tapatalk

13

SIP On Mitel / Re: Add and remove a Prefix to DN on 3300's to connect to a new PBX attached

« on: May 06, 2021, 11:59:34 AM »

I am trying to apply Speed Dial numbers to go from Mitel to the new system.
Have tried a few digits to insert which start with either * or # and do not show in the FAC.
They either come up not allowed, error.
Is there a maintenance command to show a valid choice to insert?

Sent from my SM-G973W using Tapatalk

14

SIP On Mitel / Re: Add and remove a Prefix to DN on 3300's to connect to a new PBX attached

« on: May 06, 2021, 10:26:22 AM »

Dogbreath
OK that is how I thought it was to start.
Now do I just need to add this to the Controller the SIP trunk is located on or does it need to be added to all 3 controllers?

That you

Sent from my SM-G973W using Tapatalk

15

SIP On Mitel / Add and remove a Prefix to DN on 3300's to connect to a new PBX attached

« on: May 04, 2021, 10:16:33 PM »

I have 3 MITEL 3300s connected and in service for years.
We installed a MITEL SIP Trunk to the New PBX and would like to use a *XX prefix to dial 8xxx numbers on the attached PBX.
The Attached PBX has a Site setting to add and remove the Prefix when going to the MITEL.
I would like to do the same Philosophy however have been I unsuccessful.
The SIP Peer Profile Digit Mod appears just to be for incoming DID's.
ARS Leading digits will not allow *66 which I could not find in use.
The ARS Route to the New PBX works with ARS Digits Dialed.

ANY Assistance Appreciated!