1
Mitel MiVoice Business/MCD/3300 / Re: MiVB not sending BYE to Twin leg of call
« on: October 31, 2017, 04:22:27 PM »
Thank you very much!!! Changing Hot Desk External User - Dial Tone on Call Complete to NO resolved the issue.
News:
Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Mitel MiVoice Business/MCD/3300 / MiVB not sending BYE to Twin leg of call
« on: October 20, 2017, 04:21:27 PM »
Procedure:
1. Call from Remote DUT to Mitel PRG Desktop Extension number.
2. Verify that both the Desktop Extension and the twin extension both ring simultaneously.
3. Mitel IP Phone / Twin extension answers.
4. Verify the call completes and the two parties can exchange voice communications.
5. Remote DUT initiates hang-up.
6. Verify that a BYE is received and a response is sent with a 200OK and terminates the call.
Issue:
The Remote DUT initiates hang-up, the BYE comes in from the Remote DUT but is not sent out by the MiVB to the Twin leg to disconnect the call.
Any ideas why the MiVB is not sending the BYE to the Twin leg?
1. Call from Remote DUT to Mitel PRG Desktop Extension number.
2. Verify that both the Desktop Extension and the twin extension both ring simultaneously.
3. Mitel IP Phone / Twin extension answers.
4. Verify the call completes and the two parties can exchange voice communications.
5. Remote DUT initiates hang-up.
6. Verify that a BYE is received and a response is sent with a 200OK and terminates the call.
Issue:
The Remote DUT initiates hang-up, the BYE comes in from the Remote DUT but is not sent out by the MiVB to the Twin leg to disconnect the call.
Any ideas why the MiVB is not sending the BYE to the Twin leg?
Pages: [1]