Messages

1

Mitel MiVoice Business/MCD/3300 / Re: Mitel 3300 CXi RS232 cannot input

« on: September 07, 2017, 04:03:30 PM »

The issue turn out to be the cable. I purchased another cable and was able to input via putty.

Thanks for all the help!

2

Mitel MiVoice Business/MCD/3300 / Mitel 3300 CXi RS232 cannot input

« on: September 07, 2017, 12:36:43 PM »

I have a 3300 CXi that's having some network issue. I am trying to correct it's IP using the RS232 port documented in the manual.

Using Hyperterminal, putty, and termite, I can see output from the CXi. However, I am unable to input anything. I followed the setting outlined by the document :

- Baud Rate: 9600
- Data Bits: 8
- Parity: None
- Stop Bits: 1
- Flow Control: None

I have also connected

I see the message
"The communication program will instruct you to Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts"

and nothing happens when I press <space>.

Any help would be greatly appreciated.