Messages

1

Mitel MiVoice Business/MCD/3300 / Re: DID Service Table Size

« on: November 29, 2022, 08:49:27 PM »

We operate MiVBs with approx. 3,000 DIDs in the table. No issues.

2

Mitel MiVoice Business/MCD/3300 / Re: SNMP Alarm Name With PRTG

« on: November 06, 2020, 02:19:34 AM »

Thanks for your response! I was trying to avoid that, but I guess we'll also have to follow the alarm level only approach. I wonder how MarWatch have implemented it for Mitel.

3

Mitel MiVoice Business/MCD/3300 / SNMP Alarm Name With PRTG

« on: November 04, 2020, 09:19:13 PM »

Hi everyone,

We run a fleet of Mitel 3300s and have been trialling PRTG for monitoring them. We use MPA for our 3300s with premium SWA. I'm facing some issues and wondering if anyone has come across the same.

When using mitel ipera3000cat tbl name / 1.3.6.1.4.1.1027.4.1.1.2.2.4.1.8 to obtain the system alarm name, PRTG returns "No response" which causes the sensor to go into a down state. This is because the 3300 doesn't have an active alarm. If the 3300 has an alarm, the sensor pulls the correct alarm name, displays it within PRTG and places the sensor into an "OK" state.

I've contacted PRTG support and they've indicated this is correct behaviour, which makes sense. No alarm, nothing to retrieve, poll fails and displays a "Down" state in PRTG. They've also indicated this is a "very uncommon approach for SNMP".

For those that have products like SolarWinds, Zabbix etc have you managed to get this working? If so, how did you achieve it?

Cheers!

4

Mitel MiVoice Business/MCD/3300 / Re: Make Busy codes assigned as Speedcall

« on: August 09, 2017, 11:55:19 PM »

Hi ramkulov,

If the feature access code is *2* try to make the entry *2*#[make busy code number] eg. *2*#8.

If that doesn't work, change the line type to CDE Speecall and try both *2*8 and *2*#8.

Thanks,
Andrew