Messages

1

Mitel MiVoice Business/MCD/3300 / does Mitai SDK 6 support MCD 4.2 SP1?

« on: February 26, 2018, 01:41:05 AM »

Hello everyone

Our company considering using Mitai SDK v6. We tried to use Mitai Browser tools to connect to our PBX which is MCD 4.2 SP1 . but we didn't have any luck. We always received either SXERR_SERVER_NOT_READY or SXERR_CANNOT_CONNECT_SERVICE error code.

previously we have sued SDK v 5 and we didn't have any problem.

does anyone have any information about this.

Thanks

2

Mitel MiVoice Business/MCD/3300 / Re: disable Mitel 3300 signalling encrytion

« on: April 10, 2017, 09:14:54 AM »

See which port is used for MiNet signalling, it should be any of these:

6800 TCP MiNet Server (at 3300)
6801 TCP Secure MiNet (SSL) (at 3300)
6802 TCP Secure MiNet (AES) (at 3300)

It is 6802, AES ...

3

Mitel MiVoice Business/MCD/3300 / Re: disable Mitel 3300 signalling encrytion

« on: April 10, 2017, 07:31:13 AM »

Hello,

I wanted to extract all the signalling information from network packets which were captured with a switch (port mirroring and wireshark). Unfortunately the packets data encrypted and with a little search I realized that the encryption may be aes-128.

Is there any way to disable this feature from 3300?

I had a similar problem with voice data too and there was an option in web interface to disable it, but I haven't had any luck to find anything about signalling.

Disable System Options - Voice Encryption, it changes in real time for all new calls (existing calls are not changed).

It just disable voice encryption but not the signalling.

4

Mitel MiVoice Business/MCD/3300 / disable Mitel 3300 signalling encrytion

« on: April 10, 2017, 06:08:15 AM »

Hello,

I wanted to extract all the signalling information from network packets which were captured with a switch (port mirroring and wireshark). Unfortunately the packets data encrypted and with a little search I realized that the encryption may be aes-128.

Is there any way to disable this feature from 3300?

I had a similar problem with voice data too and there was an option in web interface to disable it, but I haven't had any luck to find anything about signalling.