Messages

1

MiVoice Office 250/Mitel 5000 / Re: Challenge for the Mitel Experts (Page from External Call)

« on: February 14, 2017, 08:11:45 AM »

I've done it before.  Connect a loop start trunk port to a single line station port.  Create a phantom ext and do a manual forward of the phantom to dial trunk group, pause (or two), then page code.  So, assuming trunk is 92005 and you want page zone 0 you'd forward to 92005PP70.  But as you say, security is an issue...so you might try leaving the second P and 70 out of the forward string and requiring the caller to dial the 70, maybe even change page feature code to more digits, for example 74835-0 so caller can't stumble on it.  It's been a while since I did, so my memory might be foggy, let me know if you have trouble and I'll fool with mine again.

I'm gonna fiddle around with this! Thanks dwayneg!

2

MiVoice Office 250/Mitel 5000 / Re: Challenge for the Mitel Experts (Page from External Call)

« on: February 14, 2017, 08:10:52 AM »

mshuler,

Could you elaborate on exactly what you are wanting to accomplish?

Thanks,

TE

Basically, I'd like to page all phones from my cell phone. I need to be able to see if anyone is in our building after hours for security reasons.

3

MiVoice Office 250/Mitel 5000 / Challenge for the Mitel Experts (Page from External Call)

« on: February 13, 2017, 04:57:53 PM »

We have a Mitel MiVoice Office 250 with Mitel 5330e IP Phones. We have a page zone setup and I was wondering if anyone thinks it could be possible to somehow page the zone from an external call. (e.g. a call from my cell phone would ring all phones).

I understand this is a security issue, just wondering if someone could figure out if this was possible or not.

Appreciate any feedback