Messages

1

Mitel MiVoice Business/MCD/3300 / Re: Mitel 3300 API or CLI for automating changes

« on: October 24, 2016, 05:34:31 PM »

@lundah
There's nothing wrong with using the web interface, however as my goal is to automate this (Through on-boarding and off-boarding staff through our HR system) it makes sense to have this down automatically.

I'll look into the scheduled changes via a csv. it might be a workaround for what i'm after. Maybe. That's for the suggestion acejavelin

I'm not sure about the Open Integration Gateway. But i'll look into that. Thanks lundah

2

Mitel MiVoice Business/MCD/3300 / Re: Mitel 3300 API or CLI for automating changes

« on: October 24, 2016, 01:54:36 AM »

Ok,
I'll have a look into those.
I have found the following command: "MOVE ADD <Lastname, Firstname> TO <extension number> "
From : http://btbusiness.custhelp.com/app/answers/detail/a_id/22133/~/mn3300-maintenance-commands/c/5151/
Seems to be sort of what i'm after.

To give a better explanation i'm trying to automate staff on-boarding and off-boarding.
So once we have a staff member leave i'd like to change the display name on the phone to "Vacant", re-set the voicemail pin.

Once a new staff member comes in, i'd then like to set the display name to the new staff members details, and re-set the pin.

This way, it's done right away (Once the system picks up that there is a new user)
Currently we do not have the mitel system integrated with AD (Using LDAP)

Hope that helps make a bit more sense about what i'm trying to achieve.

3

Mitel MiVoice Business/MCD/3300 / Re: Mitel 3300 API or CLI for automating changes

« on: October 23, 2016, 08:30:07 PM »

Is this not possible?

4

Mitel MiVoice Business/MCD/3300 / Mitel 3300 API or CLI for automating changes

« on: October 17, 2016, 09:25:22 PM »

Hi there,

I have looked on this site, and there is lots of really helpful info.
But i can;t seem to find what i'm after, or if it's even possible (And i believe it should be)

What i'd like is to automate a few things, namely changing the display name for an extension number.
I know how to do this in the web interface, however i'm looking at scripting something up that will change it once given the parameters.
So i can pass through the extension number, and the new display name to change it to.

I hope that makes sense.
Is this possible? Either through a web API/or telnet or something other than going into the web page to change.