Messages

1

Mitel MiVoice Business/MCD/3300 / Install software via FTP and VXworks

« on: February 25, 2021, 03:34:02 PM »

Hi, I'm trying to install the software by changing the boot parameters in VxWorks but it just doesn't work, these are the settings I'm using:

boot device          : motfcc
unit number          : 0
processor number     : 0
host name            : bootHost
file name            : Boot_Install
inet on ethernet (e) : 192.168.1.2:ffffff00
host inet (h)        : 192.168.1.3
gateway inet (g)     : 192.168.1.1
user (u)             : ftp
ftp password (pw)    : ftp
flags (f)            : 0x0
other (o)            : FixPartition

I have an ftp server running on my laptop with correct IP but I get this message when it fails:

boot device          : ???motfcc
unit number          : 0
processor number     : 0
host name            : bootHost
file name            : Boot???Boot_Install
inet on ethernet (e) : 192.168.1.2:ffffff00
host inet (h)        : 192.168.1.3
gateway inet (g)     : 192.168.1.1
user (u)             : ftp
ftp password (pw)    : ??ftp
flags (f)            : 0x0
other (o)            : ?fixpartition???FixPartition

Can't load boot file!!

I'm trying to install MCD 6.0 as it's on a test system basically for practice

Any ideas or am I missing something?

Thanks in advance.

2

Mitel MiVoice Business/MCD/3300 / Re: Route ACD path to nupoint voicemail

« on: August 12, 2016, 04:50:37 AM »

Dialling the 2nd path direct has the same problem, if I dial from extension it thinks I want to log on

3

Mitel MiVoice Business/MCD/3300 / Re: Route ACD path to nupoint voicemail

« on: August 11, 2016, 09:21:21 AM »

ok, this is the scenario....

DDI number enters 3300 and uses a speedcall to map to ACD path 1
ACD path 1 immediately plays a RAD advising call will be recorded then interflows after 10 seconds to ACD path 2
ACD path 2 has standard agent group setup and is set to interflow to nupoint after 10 seconds
Call does route to nupoint but if dialling from external number it will ask you for a mailbox number, even though I had set up mailbox matching directory number used by ACD path 2

4

Mitel MiVoice Business/MCD/3300 / Route ACD path to nupoint voicemail

« on: August 11, 2016, 07:38:04 AM »

Hi does anyone know if you can route an ACD path to a nupoint voicemail box, when I do it recognises your extension number and thinks you want to log onto your own mailbox rather than leave a message in the paths mailbox?
Thanks
Chris