Show Posts
1
Mitel SX200, SX2000, and older SX platforms / Adding Area Code to outbound local 7 digit numbers.
« on: June 03, 2016, 04:19:41 PM »
We just switched to Charter and they do not have Wide Area Calling to make any call within an Area Code with just 7 digits.
So now I have to dial the area code for some prefixes and for more local prefixes I do not.
What I would like to do is recognize that there 7 digits dial after the initial "9" and add "864" to the beginning.
I can dial local numbers with an area code so it should not matter if it is long distance or not.
I was told form 26 then Show Strings, and add 864 followed by 7 digits and put it in the local route.
It appears to be already in that list. see attached
Your help is very much appreciated.
Thanks, Phil.
So now I have to dial the area code for some prefixes and for more local prefixes I do not.
What I would like to do is recognize that there 7 digits dial after the initial "9" and add "864" to the beginning.
I can dial local numbers with an area code so it should not matter if it is long distance or not.
I was told form 26 then Show Strings, and add 864 followed by 7 digits and put it in the local route.
It appears to be already in that list. see attached
Your help is very much appreciated.
Thanks, Phil.