Messages

1

Mitel MiVoice Business/MCD/3300 / database unavailable, use SDS to restore?

« on: October 05, 2017, 03:30:11 PM »

I have a vMCD 8.0 with 16 clustered CXii 8.0 controllers.  All of the IP phones register to the vMCD.  During my upgrades, I lost 2 of the CXii databases and don't have backups.  Can I "push" the database from the vMCD using share/sync and what is the process?

2

Mitel SX200, SX2000, and older SX platforms / SX200 keeps rebooting

« on: November 30, 2016, 01:51:22 PM »

I have a 6 month old SX200 AX controller that keeps rebooting.  It will boot up, I can log in, but it resets before I can get into any menus.  I have checked the boot parameters and found something suspect, but I'm not sure what it means "Error loading file: errno  0x3d00002.  Can't load boot file."  Can anyone point me in the right direction?  TIA!

3

Mitel SX200, SX2000, and older SX platforms / Re: SX-200 Auto Attendant operator settings.

« on: May 26, 2016, 05:01:30 PM »

So I have a the same setup, press 1 for Reservations, 2, 3, or 0 for the operator.  Mailbox 0 is associated with extension 0 and is a transfer only.  I just set this AA up last week, previous to that an outside call would ring the front desk indefinitely, but now it goes to mailbox after 4 or 5 rings.  I assume it's because it now transfers to 0 instead of ringing in on LDN 196.  I tried to make the associated extension of mailbox 0 196, but then it only rang once before going to a mailbox.  Also I don't know what mailbox it's going to, the message is generic, either way, the customer wants it to keep ringing. TIA!!