Messages

1

Mitel MiVoice Business/MCD/3300 / Re: 3300 CXi and Cisco switch voice VLAN and different Data VLAN

« on: April 25, 2016, 02:40:52 PM »

- Program DHCP in CXi and be sure to include vlan options to allow the phones to tag their packets.

Hi sarond, thanks very much for your input.

acejavlin's advice was not to define VLAN in DHCP option. I wonder who is correct!

2

Mitel MiVoice Business/MCD/3300 / Re: 3300 CXi and Cisco switch voice VLAN and different Data VLAN

« on: April 24, 2016, 11:32:13 AM »

Hi Both, thank you for your replies especially acejavlin for taking the time to exlplain.

I am the IT guy here and the Mitel system was configured by an external company and we don't have support contract for the Mitel at present.

We are not using the CXi builtin switchports. I will be doing the routing between VLANs on the Cisco ASA. I have added the Telephony OUI on the switch under voice VLAN. Please see attached pic. is there a predefined string for the Mitel phones?

Many thanks.

3

Mitel MiVoice Business/MCD/3300 / 3300 CXi and Cisco switch voice VLAN and different Data VLAN

« on: April 23, 2016, 11:49:55 AM »

Hello All,

First of all I am new to Mitel system so forgive my ignorance. We have a Mitel 3300 CXi running MiVoice Business 7.0 SP1, active software load 13.0.1.28.

The Mitel is on 10.44.9.33 running a DHCP server and Data and Voice are on VLAN 1. It is connected to a Cisco SG500-28P switch (Sw3) via the LAN port. SW3 is connected to a Cisco SG500-48P switch (SW2).
I need to change the Data VLAN to 350 and Voice VLAN to 300 and will be using a Cisco 5512-x ASA connected to the SW3 as the DHCP server and Internet gateway for the PCs. The Mitel will be the DHCP server for Voice only. I need to change the Mitel IP address to 10.44.30.1

Can someone please give me some advice on how to best achieve this. I was thinking changing the IP address to 10.44.30.1, Voice VLAN ID to 300 and Data VLAN ID to 350 in the System IP Properties form, set the port on SW3 that’s connected to Mitel as trunk and tag VLAN 300 untag VLAN 350. Setup DHCP server on ASA 10.44.9.1 and set option 43 and other Mitel options and enable Voice VLAN 300 on the Cisco switches. Is this the right way doing this? Both Switches support LLDP as well.

Your advice will be greatly appreciated.
Many thanks