Messages

1

Mitel SX200, SX2000, and older SX platforms / SX200 ICP - vlans

« on: November 09, 2015, 02:01:25 PM »

I'm new to these forums so hopefully I am giving as much information as needed. With addition of some IP phones, we decided to set them up in a vlan. This part is working correctly and router is working correctly in that I can ping across vlans from one to the other without issue. The problem I am having now is I am unable to get in to the Secure telnet session I was able to get in to before. I have tried telneting and using a web browser but no success. If I put the PC I am telnetting from in to the same VLAN that the SX200 is on, then the telnet session works. If I put the pc back on to the main vlan then I am no longer able to connect through telnet. I can ping the SX200 from the pc where I use telnet from. But not telnet to it. Also, along these same lines I am unable to run a backup as I used to when everything was under the same vlan. If I put both the PC and the SX on the same vlan - I am still not able to backup. I am using CaserFTP to backup. Could someone offer some suggestions on what I can do to fix this issue(s)? Or shed some light on where I could look for a fix? Thanks in advance.

I did try searching these forums, but nothing matched up with what I was looking for.