Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - msouva

Pages: [1] 2 3 ... 7
1
Mitel MiVoice Business/MCD/3300 / Re: Bill for License Violation
« on: September 01, 2020, 09:49:18 AM »
Johnp,

Yes, my question was answered.  We do have a contract, just was surprised at the bill.  I watch the file being FTP into place and the command run to put the certificate in place.  It looked straight forward to do.

Thanks again everyone for the information.  :)


2
Mitel MiVoice Business/MCD/3300 / Re: Bill for License Violation
« on: August 31, 2020, 10:35:36 AM »
Well, I was just asking because this issue was not a result of something we did to the system.  My opinion is that this was a Mitel issue and we should not pay to have the certificate put in place.  Thank you everyone for the information and discussion.

3
Mitel MiVoice Business/MCD/3300 / Bill for License Violation
« on: August 28, 2020, 02:18:14 PM »
We are being billed for the license violation issue, has anyone else been billed? 

4
When you did the FTP transfer, did you set it to binary transfer?

5
Mitel MiVoice Business/MCD/3300 / Mitel Wireless LAN Stand
« on: August 03, 2020, 01:44:13 PM »
I am looking at one of these for a user that does not have access to a wire.  I did see a note that it works with version 9.1.  We are still on version 8 here, does this device work with the 8 version?  I see notes going back before 9 was released.

Thank you

Mark

6
Mitel MiVoice Business/MCD/3300 / Re: Class of Restriction question
« on: May 07, 2020, 01:15:28 PM »
Thank you acejavelin!  I see the light!!   ;D


7
Mitel MiVoice Business/MCD/3300 / Class of Restriction question
« on: May 07, 2020, 12:50:38 PM »
Good afternooon all,

   I have been looking through all the posts in regards to Class of Restrictions.  I am hoping someone can help me sort this out.  I did not originally set this up, but here is what I have.
   
   COR 22 - No Outside Calls - Table has 21,22
   COR 23 - Local Calls - Table has 21-23
   
   ARS Digits Dialed - Local Calls - 9315+7 COR 22
   
   I have confirmed that moving the Station COR from 23 to 22 denies the dial, but I just don't see the logic?  In what I have found this setup seems to be backwards?  What am I missing?
   
Thank you,
   
Mark

8
I created a trunk group where I alternate the trunks(1,25,2,26,3,27... etc) between my two PRI's.  I set it for circular so it goes through all trunks.  In the ARS I have it use this trunk group first then the other two that are separate. 

9
Is there a way with the DISA to force the system to use the default Caller ID?  When I make a call through DISA it displays the caller ID of the phone I am calling from.

10
Mitel MiVoice Business/MCD/3300 / Re: Dial by name for Mitel 3300
« on: March 23, 2020, 11:13:56 AM »
Got it working.  Thank you!

11
Mitel MiVoice Business/MCD/3300 / Dial by name for Mitel 3300
« on: March 22, 2020, 12:47:05 PM »
Is there a dial by name for the auto attendant for a Mitel 3300?  I have read there is, but cannot find anything about setting it up

12
I would start with a DGT TRACE of the numbers in the Maintenance Commands and see where the number is being sent along the ARS.   i.e.  DGT TRACE 918885559500

13
Mitel MiVoice Business/MCD/3300 / Remote Teleworker phones rebooting
« on: January 30, 2020, 09:16:08 AM »
I have remote users saying that their phones are rebooting on their own.  I do not have any alarms on the teleworker side at this time.  What log files would show a reboot of these phones?

14
Mitel MiVoice Business/MCD/3300 / Requirements for 69xx phones
« on: January 16, 2020, 11:14:24 AM »
What licenses are required for the 69xx features?  The mobile link?  Transferring a call from the desk phone to your cell phone?  Does this require MiCollab?

Thank you,

Mark

15
Mitel MiVoice Business/MCD/3300 / Re: Hot Desking
« on: July 24, 2019, 10:53:52 AM »
I have the "dummy" phones here set up as "IP Device Only" with a COS that allows hot desk login.  The "IP Device Only" does not take up a license.  The phone cannot make outbound calls.

Pages: [1] 2 3 ... 7