1
MiVoice Office 250/Mitel 5000 / Re: Inter-tel 8622 SIP
« on: June 23, 2015, 09:02:56 AM »
Any idea how to renable MINET on the 5320 after I changed it to SIP. I wanted to change it back after testing.
News:
Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
MiVoice Office 250/Mitel 5000 / Re: Inter-tel 8622 SIP
« on: June 22, 2015, 04:12:56 PM »
Is there a way on either the 8622 or the 5320e to make it show Do Not Disturb when the DND key is pressed? Currently if I press it it says *DND ON* then flashes away. I want it to stay on when DND is pressed. Keep in mind this is all in effort to move to the asterisk system and save money by utilizing the mitel phones. I have them working in every feature except this DND. My only goal is to get the user to have some type of display that stays up that says DND.
The Asterisk code for DND sis *76 however it appears that Mitel does not like reading the BLF code that works on asterisks phones liek CISCO,YEALINK, DIGIUM, etc.
Any advice?
The Asterisk code for DND sis *76 however it appears that Mitel does not like reading the BLF code that works on asterisks phones liek CISCO,YEALINK, DIGIUM, etc.
Any advice?
3
MiVoice Office 250/Mitel 5000 / Inter-tel 8622 SIP
« on: June 22, 2015, 09:40:34 AM »
I know how to change over the 5320e over to SIP mode and have no issue. Is there w ay to change over the Intertel 8622 to sip mode? If so is there any documentation to do it?
On the mitel phones I just heald *7 and changed to sip mode than programmed from web interface.
On the mitel phones I just heald *7 and changed to sip mode than programmed from web interface.
4
MiVoice Office 250/Mitel 5000 / Re: Intel 8622 Gateway IP
« on: June 08, 2015, 03:06:09 PM »
That is just asking me to configure static ip.
I want to put in the ip address of my phone system.
Is there a manual that shows what keys do what from this point?
I want to put in the ip address of my phone system.
Is there a manual that shows what keys do what from this point?
5
MiVoice Office 250/Mitel 5000 / Intel 8622 Gateway IP
« on: June 08, 2015, 11:18:17 AM »
How to manually enter Gateway IP for remonte phones?
Intel 8622
Cant figure it out.
Intel 8622
Cant figure it out.
6
MiVoice Office 250/Mitel 5000 / Looking for IP Card
« on: June 08, 2015, 08:21:44 AM »
Got remote phones booting up now saying "Looking for IP Card" any ideas? I verified that their access from remote can ping the phone server and all ports open for it.
7
MiVoice Office 250/Mitel 5000 / Mitel CT Gateway Client
« on: June 05, 2015, 01:14:57 PM »
Anyone got 5.0.34.0 Mitel Gateway Client. I need to uupdate mine and have no software.
8
MiVoice Office 250/Mitel 5000 / Re: Mitel phones 5320e DHCP Issue
« on: June 05, 2015, 12:28:01 PM »
I am scheduled on the 20th to do the cutover at work with the VLAN I will have to test it at that point. I do have a 2nd NIC I can utilize in my ESXi box that is holding my servers.
9
MiVoice Office 250/Mitel 5000 / Re: Mitel 5320e
« on: June 05, 2015, 10:05:36 AM »
I figured it out. I had to enable NAT in the 5000 for that particular phone.
10
MiVoice Office 250/Mitel 5000 / Re: Mitel phones 5320e DHCP Issue
« on: June 05, 2015, 09:57:02 AM »
So does anyone have experience using Server DHCP?
11
MiVoice Office 250/Mitel 5000 / Re: Mitel 5320e
« on: June 05, 2015, 07:45:57 AM »
It is only affecting the 5320 phone.
Now me coming from a background of Asterisk and SIP I must ask..
Is there any type of STUN server input anywhere?
The remote location need any ports open?
So when I call that phone extension the phone rings. THe person picks up and I can hear them but they cannot hear me.
Now me coming from a background of Asterisk and SIP I must ask..
Is there any type of STUN server input anywhere?
The remote location need any ports open?
So when I call that phone extension the phone rings. THe person picks up and I can hear them but they cannot hear me.
12
MiVoice Office 250/Mitel 5000 / Re: Mitel 5320e
« on: June 04, 2015, 03:08:32 PM »
yeah I checked that and nothing is misconfigured.
13
MiVoice Office 250/Mitel 5000 / Re: Mitel phones 5320e DHCP Issue
« on: June 04, 2015, 03:04:05 PM »
Turns out LLDP is scary. it some how replicated to the POE switch and was telling it to look on VLAN2. SURPRISE!!!!
14
MiVoice Office 250/Mitel 5000 / Re: Mitel phones 5320e DHCP Issue
« on: June 04, 2015, 02:43:02 PM »
To make things really awesome. Now all of my 5320 phones are pulling weird stuff.
They are booting up and thinking they are on VLAN 2 then just sit there at DHCP: Discovery. I have no VLANS currently. I removed all of them. LLDP is disabled on everything. It is back to what it used to be.
Funny thing.....
If I plug into another switch it works.
They are booting up and thinking they are on VLAN 2 then just sit there at DHCP: Discovery. I have no VLANS currently. I removed all of them. LLDP is disabled on everything. It is back to what it used to be.
Funny thing.....
If I plug into another switch it works.
15
MiVoice Office 250/Mitel 5000 / Re: Mitel 5320e
« on: June 04, 2015, 01:49:59 PM »
Not sure if we have PEC where do I change we have HX Expansion